Vortec27

All I done is open valve a bit more Not close it . When it was mapped the valve was closed a bit more then I have it now . Might go adjust it back to how it was

Idle set at 900 rpm.The noise was not the normal bypass swoosh jet noise it was like a metal whistle just as I hit the gas

No afr gauge fitted yet. What's compressor surge?

Yea it's been mapped. I've only adjusted it because of the whistle noise was getting on my nerves wish I never touched it now

Not sure can anyone confirm this ?

That look like 9 threads chubs from top bottom?

Hi mate

how much did you make after map with the 287 pulley on stock block

?

Ok nice 1 chubs

Hi chub What yours set at is how much threads showing after nut ?

il have a look tonight when im out at the garage. its never been used yet so should be the correct setting so il report back later

Nice1 mate

Hi chub What yours set at is how much threads showing after nut ?

Hi all im getting metal whistle kind of sound from bypass valve ?

I see there's a jam nut with a Allen key adjustment in the middle what I need to know is how many threads need to be showing ?

Thankw vortec27

Nice hp figures .But what torque you producing with a charger.

Torque is 366 lbft

Congratulations How much boost and hp are you making? Bet you are enjoying your new power!

Hi mate what powers you got ?

Yes I'm loveing the new powers 440@ the hub

Lol

Good news I'm now turned :-)

sounds like I'm on the right track. I'm about to. hangs the pulley to a 3.12 a little more boost after that I'm gonna take to get tune and dyno hope I get good results out of it. can't wait

Hi mate where you get tune done ?

Hi all need info on tuining timeing retard on the ss box

Hi all if anyone needs a vortech 3.33 pully give us a shout

Thanks vortec

At last mate welcome to the vortech sc club

Hi all just got back from holiday & seen this . & my question is how much ? Need for my V2 ?

Good stuff mate. as I've just got a set of b8 shocks not fitted them yet will let you know what I think after ive fitted

Ive just put a brand New set of H&R blue super sport spring on eBay cheap just letting you lot know

Just letting you lot know there's some H&R super sport spring lowering springs on eebay cheap

!!

There about 15mm deep will be ok ?