Ortega_9

And the left hand side test fitted.

i Think i might have to adjust the wastegate piping as the flanges are a little off... but Otherwise everything looks fine....

Right hand side test fitted.

everything seems to be in place.

And ALL done... Well, the manifolds, then i Can begin the teardown

And the last manifold underway.

And just Got my new wastegate springs in.

Small red tial springs will see 0,4 bar.

and that's about ALL i dare on the Stock vq. So that's the starting point. 

I can't take credit for the work.

this is made by my freind at power-pipes raceshop in Denmark. They Can do work!

i'll fab most parts myself, but stuff like this needs much more skill with the glue gun than I'll ever get

And glued together

Some progress....

On 8/12/2017 at 17:46, Toon Chris said:

 

Good God man, never mind the child seat, your steering wheel is on the wrong side!

Sold. Please remove

8 hours ago, AMT said:

Same sort of set up and put right back in mine. I still wouldn't want an airbag in their face as can still hurt but again can remove.  I've never removed mine. 

 

Where is the fuse for the passenger airbag and what no. is it? (assuming its a numbered fuse).

I'm not sure about the fuse... does it only affect the passenger side front airbag? There is also the curtain airbag, and the one in the seat...

I Think the airbag is only a problem on rear facing Child seats?

this setup works fine for me

Just had the new flanges cut for the new stainless turbo manifolds....

Hope their done in a weeks time or so

SOLD.

please remove.

Reduced again.

1800£

and I'll be happy to buy your manifolds for 100£ if you want to part with them

Here you go

http://www.gammamotors.com/repleacement-parts/manifolds/turbo-exhaust-manifolds/v1-turbo-exhaust-manifolds-350z-g35-vq35hr-vq35de

I wanted to get a new one, but decided to get a stainless stell pair made up instead.... 

That depends. It's bearings and shafts...

and Thank you.

A new one is around 1000$ with the ceramic coating, and Yes, it's not for everyone. I had it done one time before, but it will crack again over time.

if you could do 300£ shipped, then you Would have a good pair that Would so much easier to sell than our two cracked pairs... and i bet someone Would still buy the cracked pair for a template for a stainless set, or maybe even try the repair.

8 minutes ago, ZMANALEX said:

It will cost circa $1500.00 to get the head unit reconditioned by Procharger in USA.

I have had 3 done in the past over the years.

I will get the ball moving by offering you £1000.00 shipped.

Alex.

Thank you for the offer zmalax, i have an offer of 1500£ on PM. 

And all the parts needed Can also be round here: http://www.superchargerrebuild.com/other-centrifugal-c2-p1sc-p600b-d1-etc/

Price reduced further.

now only 1900£ shipped

Reduced Once more.

350£ Takes them.

Thank you. It does take ALOT of wetsanding and polishing to get there...

Price further reduced 60£ shipped

Price reduced again.

400£ shipped