Chee350

as this is an ancient thread im going to assume this V2 has gone to a new home. If however its simply collecting dust. il take it! im desperate for one of these!

Any news on these guys?

Let us know how it goes pal

I'm looking at a remap soon and think RS is the closest to me as I'm over Liverpool way.

Thanks for the replies guys. I'm going to have to keep looking as it's the V2 I'm after. I do like the V1 but I don't think the V1 wing would go with a V2 front. I may have to chance a replica!!

As you may guess I'm after a V2 rear spoiler. I've contacted EP Racing but they are out of stock until November. They have the carbon bladed one but I'm after the OEM style as I'm going to colour the wing the same as some other bits on the car! Should be special!

Anyone know where else or rather where a decent one can be found or if anyone's selling on. Cheers guys.

Thanks

Chee.

Cheers Coldel

Would this effectively become useless after the remap then?

Prob a stupid question but are these a pain to wire in. And if I'm going to remap should I fit this pre or post remap?

Cheers for any help.

I may take this if it's still available. Thinking of trying something wild.

Are they all deep dish like in the pic?

I'm after a set of these, have e mailed you about them as I love the Grid drifts on your site but these look different with the deep dish?

Or am I being stupid?

Would you go for a K2 or a scorpion then?

Cheers mate il check it out.

As I missed out on Luke's K1 yesterday, DAM!!! im putting up a post (after a little nudge ) to see if anyone's got one to sell?

Cheers all

As it looks like this is sold, is anyone out there looking to sell a K1??

Pm'd

Just found this thread.

I've been in RRL for a while now. Some at 20p :-( but most at around 12p. Nearly had a heart attack last week and begged for an early payday lol but I feel this share is only going one way when the Market settles.

Good luck all and nice to see some like minded people in the same company as me.

Bry they're some good gains!

Im going to be starting my Z soon hopefully in the next month so il be looking at doing the same style of mods that you've carried out before my remap that I may now well get Jez to do. I am however interested in the Buddy Club exhaust you have fitted. hows life with it? I was looking at them but have read their extremely loud even at low revs. is this the case?

cheers and jelous of the mods

Cheers for the reply's, think the buddy club will be out of the question now as im quite often in after midnight with my job. I did love the look of it though. The scorpion looks like a good option so might read up on these before making my decision. Is there any contacts on here for scorpion exhausts? id rather use someone through the forum if I can

This thread as been mega helpful!

I am however looking at the buddy club exhaust and just wondering if anyone else has got this or had experience with one. I want a good bit of grunt when I punch the throttle but I don't want to wake up the street when I'm pulling onto the drive late at night.

ideally id like to come down to a meet and listen to a few, im based in Southport north of liverpool and any help would be appreciated guys

Guys im looking for (as you may have guessed) a Buddy Club exhaust.

Done some research and these seem pretty decent, so if anyone's selling id be interested. Id also be interested in peoples opinions of these but from what I've read on here they seem pretty solid.

Cheers all!

CMR I'm looking at ten spoke wheels for my Z as their just a personal fav of mine. Ideally i want some that ark out slightly like the Kahn RSV but my main issue is i dont want to affect the handling and also the Brembo's look awesome behind an 18 so i dont really want to go larger.

RC182 I feel your pain, ive seen some nice KEI Force 10's that i love but again only up to 7.5 width.

If there are any Jap wheel specialists out there lets us know!

Hi guys,

I'm looking at, getting some new wheels on my z once I have it but I'm struggling to find any 18's that match the size of the stock RAYS. Does anybody know if this is a common issue as I don't really want to go stupidly large but don't want the handling to be affected as the RAYS are 18 x 8.0 front and 8.5 rear. The problem seems to be finding nice wheels that go over the 7.5 width mark.

any help would be appreciated.

cheers guys

also just out of interest, has anyone got any pics of the car back in it's green days?

that one pic ive seen......amazing

Ebized thanks for the info on the PM's. I will have to get posting!!

Also thanks for the link, the car looks amazing. From what i understand the performance mods will be stripped (for a new project i assume) is this correct? im serious about this car and the timings almost to perfect to be honest so il get posting to unlock the PM feature.

getting excited now!!!!

P15UL T im very interested indeed. do you have any pics post spray? also as previously mentioned i cant get the PM to work on my PC so would you be able to PM me or if not i could drop you an Email?

thanks mate

Thanks for all the replies guys,

The hunt is well and truly on and I appreciate the advise given above (as when I see something I want I do have a tendency to buy and think later). To those who are selling their Z's at the moment, I've tried the PM link on my page but when I click it no box opens to compose a message so I have been unable to send any.

I am interested though guys, P15UL T yours sounds like a dream come true im just worried I may have to break into my bank first.

Thanks again guys.