djti636

best on for a top up? looking a little shy at the moment

regards

Looks a little low, whats recommended for top up ?

Regards

thanks

have you sorted this ? as i think i have a spare?

should still have a spare oem backbox used with the connecting pipe cut, means you will need to weld it to mate to oem centre pip. pm me if you are interested NW london area.

Regards

Should still have a pair of orange side skirts available NW london area pm me

Mines from an s2k, correct about the very bottom of the ariel but no one has commented on it

pricing sounds right + one on the RT comment, top job! would have thought the front wings should be blended too, but just food for thought

Far from just smoothed but the tango was me! was bizarre to have the 3 of us all on the same place at once.

Passed you going opposite direction in the pouring rain wasnt until we were side by side that i twigged it was a Z.

anyone on here? you let me pull infront from the post office. cheers!

Ebay is blocked from the office what do the go for approximately?

Bump on the side skirts, open to offers. sitting doing nothing need them gone! regards

As above to replace the 'Nissan' logo on the rear of the Zed.

Regards

Front bumper now sold, side skirts open to offers

Oem 350z front bumper from my '53' plate orange coupe is for sale and side skirts. Usual stone chips for its age and a scuff on the underside not visible when fitted.

Have seen front bumpers in the region of £150ono, and skirts to adhere to rules £120ono

Collection from wembley during regular working hours is fine alternatively postage is available, front bumper at £30 and skirts £20

Regards

Dave

thank you GLRNET

Its only due to noise restrictions. But i do understand why you have posted your comment and its fair enough. The below was sorted a long time ago when I changed the sensor after purchasing oem from nissan was simply due to trying to minimise cost.

Apologies for the confusion anyway guys its just the exhaust that am after not an entire car.

glrnet

Why don't you PM Mark at Abbeymotorsport and ask if you can observe some stuff in their dyno room, the chances of anyone lending a car are almost zero I would say, purely from an insurance point of view alone.

 

**EDIT** What happened to your car?

 

http://www.350z-uk.c...w-very-briefly/

 

A good deal of your posts have involved "to borrow" and I'm posting this so other members are aware. You may have very honest intentions but as one or two have already adopted a cynical or "inquisitive stance" on this thread it seems fair to make people aware.

I am located in london can travel to collect. Urgently required for a temporary duration however if one isnt available for loan I could purchase and sell on at a later date although would make things more strenuous, at this point its a necessary requirement.

please let me know what you have available. kind regards

guys am such a numb nut let me change the title. STRESSED!!!! I need an exhaust not a bloody car haha sorry guys

No I have work to do for my dissertation and cant run my car on the dyno as its too loud. so need to get it fitted asap.

Can anyone be helpful and offer a hand instead ?

I am located in london can travel to collect. Urgently required for a temporary duration however if one isnt available for loan I could purchase and sell on at a later date although would make things more strenuous, at this point its a necessary requirement.

please let me know what you have available. kind regards

As above if anyone in the london area has an OEM back box that I could borrow for a short duration it would be highly appreciated.

That or could come to some sort of deal for its use. urgently required if anyone can help please contact me asap.

kind regards

There's a guide for it.

 

Take panel off covering sub, remove sub, unscrew the amp in there, open it, there's a tall darkish grey box inside, about 20mm by 10-15mm. Tape about 5mm of paper or the required amount of that sponge tape if you have it and put it all back together.

 

Worked for me, for nearly a year but needs fiddled with again, just gotta get the time to have a look, paper may have moved.

Nice one, i assume this just applies pressure to the grey box to ensure the contacts remain connected?