Jump to content

Clarkie

Members
  • Posts

    420
  • Joined

  • Last visited

Posts posted by Clarkie

  1. If you have high flow cats on make sure the guy doing the testing is aware so the car can be taken out to warm them up before testing as soon as possible otherwise it will fail the test. I had to do this with my Berks after they were fitted.

  2. 1. Wizard: Vortech v3 3:13 pulley, 'DE bone stock motor, 13psi, Uprev tune, 450bhp / 400lb/ft @hubs, Over 10K boosted miles so far.

    2. Sam McGoo: Vortech V2 3:33 pulley,'54 DE stock engine,9.14psi,Uprev@Abbey, 402 HP/336lb/ft @Hubs 25k boosted on a 27k engine.

    3. 4Re Leather: GTM S/C. Small pulley. 2009 HR Stock Engine. 10.35 Boost, 464.5bhp/383.3Ib/ft @ Hubs, 2k boosted on a 17k Engine

    4. Oskaben: Vortech v2 Supercharger, no idea about anything else until mark at abbey takes it off the standard vortech fuelling and tunes it correctly! 5k boosted on 36k engine.

    5. Darren-b: Vortech V3 standard pulley,'54 DE stock engine,???psi,Uprev@Abbey, 429 HP/???lb/ft @Hubs 7k boosted on a 68k engine.

    6. Kev T: GTM supercharger, VQ37HR stock, 7.5psi, Uprev tune, 432@the hub and 367ft/lb torque with standard pulley

    7. PlanetSurfer2: GTM TT, stock 'HR motor, 6psi, Uprev Tune, 415bhp and 376lb/ft @ Hubs. Over 4k boosted miles so far.

    8. Keyser: Vortech v2, 3:12 pulley, Fully forged 'DE motor with Tomei pro cams, Haltech Platinum pro, 458bhp / 367lb/ft w/out Nos, 503bhp / 429lb/ft w/ Nos @ Hubs. 4k boosted miles

    9. andy james: GTM S/C, standard pulley, Stock 'HR motor, Uprev, 448.4bhp / 367 lb/ft @ hubs. 1k boosted on a 24k engine.

    10. djtimo: APS TT Garrett Kit, Fully forged Abbey 'DE block, Uprev tune, 11 psi, 469bhp / 448 lb/ft @ hubs

    11. jables: SFR TT, DE stock engine, 7.2psi, Uprev tune, 404bhp / 380lb/ft @ hubs, over 20k boosted on a 37k engine

    12. OllyB: GTM S/C, standard pulley, Stock 'HR motor, 9 psi, Uprev, 471bhp / 371 lb/ft @ hubs.

    13. The chubby ninja- Vortech V3 SCi ,VQ35DE stock, 10psi, uprev tune, 408.9@ the hub / 336ft/lb torque with 3.12 pulley

    14. Clarkie - Vortech V2 '55 VQ35DE stock. ???psi, uprev tune, 415 @ the hub / ??? torque with 3.12 pulley

  3. Leeds :D I'm in Aberdeen and had to go to RSTuning in Leeds when I got my Uprev done. I was roadtripping down south so it made sense. Sadly there's no Uprev places up this end of the country!

  4. most of the exhaust is hidden but you can see the backbox through the gap so make sure you get something you can make nice and shiny! jolly, the rears aren't tinted, just normal clear indictors as far as I am aware!

×
×
  • Create New...