jumping350

right found a set of rota gtrs that have come off a 350z im even more confused now than ever!!!!here are the dimensions:front 9" ET 35

rears 10" ET 30

These seem to be the rims for the 350z everywhere i look for them, however in above post was mentioned 35mm ET was no good for car, but these as you can see have them, are these gonna be ok for my car???????

personally wasnt to keen on them does anyone have a pic of them on blade silver car?been offered them in a swap for something else not 100% sure on them had set on my civic turbo they looked nice but were in black and these are silver, its the lights or leave it and money goes towards carbon bonnet

hi all after one of the above if anyone has one (and passenger door/bonnet lol)

cheers

heres one for you, what about those universal multifit rims with like 8 bolt holes??is the Z a common size that would fit this supposedly universal fitament??as long as offset is correct

if i get spacers would that help with offset issues??i cant find (except for proper expensive) wheels with less than 30mm ET

sorry for mad questions just trying to see what i can get away with without and with a spacer

cool thanks for help il have a read around and run another diameter past you all before i buy some wheels

hmmmm this is getting confusing so basically look for some wheels with an offsett of -20 for fronts

most wheels ive seen have 8" front 9.5" rear so thats what ive been going for and will carry on doing

Thanls for help

the search continues.........

must be 35mm and put a decimal in by accident.

it says 8" fromt 9.5" rear but also has that 8.75j in message not sure if that was eant to be there??

so even if right not worth the bother if it compromises handling etc???

im wanting 18s have not go brembos so could you reccomend a fitmant spec where i dont have to use spacers??

thanks , i have non brembos so would that be ok for my car??

Hi came across a set of wheels with this diameter

5x114 (says nissan fitament) 3.5 ET (dont know what ET is??)

18 inch rim says rim width is 8.75j (not sure as wouldnt the rears be different width to front??)

8" front

9.5" rear

would these fit the Z without spacers etc and what tyre size would i need???

any help would be appreciated

yeah i think i got spotted, im the one with the blacked out bit under grill in south croydon

anyone got one??what they like??

or put ling long tyres on them for budgets sake

My god what was that lexus owner thinking...looks like its suspension has collapsed

Haha im not magyver but who knows maybe one day lol

Funny enough me and my mate came across some R35 wheels guy had written car off and 3 out of 4 wheels were damaged 2 pretty bad...were gonna try and blag them for the Z but at £800 for damaged wheels was bit t risky for me...knowing us they would have come out square

yep just regular mid pipe with box cut out and pipe put in place, i wired brushed the hell out of it to get rust off but i think your referring to how silver it is, thats heat/rust resistant stuff (no more flange rusting for me....hopefully)

cheers husky was reading your legendary write up on rear box sounds like might be an epic one for me lol (i think we share the same ground when it comes to mods...do it your self and see or do it yourself then have it fixed)

we do get it right sometimes tho

As the government have messed me up with all there job cuts and everything else cuts while putting everything else up... money was stretched.

Pesky rusting of mid pipe flange hit the Z (thought it would never happen to me lol)

as everyone does wanted bit more punch out of exhaust if replacing it but cant justify paying £100+ for just mid pipe

here it is total cost to me £25 (if you can blag an old mid pipe and can weld)

definately more noise and bit more punchier on low revs

Hi all ive trawled through threads for hours, anyone got a write up or something on removing rear box.....i know its straight forward im more worried bout getting it off the hangers so looking for some advice or guidance to make that process easier,and of course some pictures .

im on lookout for blade pssenger door(again) if anyone has one

Thanks

Get it welded, may have centre section for you il have to check if its still in garage or GF threw it lol

Which belt is this one?? i mean were does it go on car??

Hi after a centre section exhaust gasket or a couple if possible,fairly thick if anyone has got any???

Got one in surrey

Thanks for comments

@LRF4N lol

well sold diffuser so nismo skirts and spats prob (in blade) i think will go down ok,gonna trial fit skirts while exhaust getting done today will try get some pics

Got loads of good feedback when took it out last night....now i think i can drive round without getting laughed at lol il prob bond splitter on

(tried selling N1 bumper-no one wants it,so will spray and just have second option for front)

yeah wheels are gonna be priority v soon,il keep that in mind..i love those rota gtrs not sure if i can scrape 850 plus tyres at mo, got anything else?

reason being brembos sitting in cupboard so gotta get them on and custom centre pipe going on 2mo...and gotta get another door ...bucks going out lol

nope even i was shocked at mates price but did brilliant job,was banging head sorting how black line would come down from grill,got it right i think

would of been around 100-110 if i did it like this first time round think i wasted fair bit of gloss black paint