stesrg

forgot to take some rear side shots Ste .

lovely sound but cant find the make anyone ? Ste .

and finaly a photo paint or no paint that is the question

Brought car last week and this was fitted looks quite technical

Ok ok its a divider but it has 2 clever sides to it 1 YES BOOT DIVIDER 2 If you notice it is covered in sound proofing material and STOPS the noisy exhaust No seriously had the car 1 week now and love it to bits however I found a fault yes put my shopping in the boot one night , well 1st night from tesco's going down the road some dilinquent ran out infront of me and i hit the brakes hard and ended up with most of my shopping in the cockpit so just a bit ov velcro now and volla lovely job opinions please .......... Ste .

http://img.photobucket.com/albums/v425/ ... Z/ZED2.jpg your answers please ..... more photo's later Ste

Bloody hell glad he is ok anyway what made me laugh was he was still trying to stear when he had no wheels on just tickled me Ste .

When you buy a bonnet from a dealer, they come in etch primer colour. So black. Same this end of the world, doesn't matter which colour. So it matches the engine bays as they don't continue the exterior into the bay. hmmm mine looks crap and most of the cars i have owned have a gloss underside on the bonnet as well as insulating foam SO gonna get it painted Ste .

Thanks for all overwhelming welcolm's think I am gonna like this fourum the car is fitted with a cold air induction kit from the states and also has some lovely sounding rear pipes made in the usa like 2 round pollished stainless baffels and 2 large exit pipes on a lovely tapper apparantly cost £1500 gonna try and take some photos soon . Ste .

Yeah passanger side gets condensation in it.Just whip the wheel off,remove arch liner,take sidelight and indicator out and give it a blast with my car dryer.Job done. Clarkie you can permenantly fix this bud....whip off your headlights and run some black silicon sealent around the edges this will make a water tight seal and should stop them from steaming up thanks fast responce Ste .

Hi all just been faffing about with the car and the passinger side light unit is quite misted up how can I get rid and stop this from happening again ... Thanks Ste .

Thanks for the info I could fabticate a 50mm stainless perforated pipe with 80mm outer wrapped with an insulating material !! this would stop the resonance , I used chery bombs on my ZM to de-cat that, could do with an old Cat to set up a Jig Anyone ? Ste .. I could help you with an old cat/cats but you will need a pair as they are handed. Let me know if I can help you further. Alex. Thanks for offer alex , but could do with someone a bit closer and willing to lend them me for about 2 months as I tend to take my time mind you dont think it would take too long to fab up a jig but just incase as I rather busy at times !! anyone can I please borrow your cats for a few months at the most I prommis I will take care of them and return them as you gave me them.... Oh not the pussy ones btw Ste . There are shipping companies up in Scotland you know. I know but the items are heavy and when I finished with them I got to ship em back I am on a budget you know Ste .

Oh stuff it will paint it anyway I like the engine bay as I could eat my dinner out of it on a plate of course Ste .

Yes underside ..... Hmmmm could be none laquered as I thought a near match for primer Need to get this sorted then the only faulf I can find , thats appart from the rusty outrigers gonna get it up on the ramps soon and sandblast the rusty bits and waxoil it all Ste .

Hi all as new to nissans when I got my blade silver Z the bonnet had been replaced under warantee however when liffted it is still like it is finished in primer ! are they supposed to be this way ? of finished in gloss . Thanks Ste . pics posted soon ...

Thanks for the info I could fabticate a 50mm stainless perforated pipe with 80mm outer wrapped with an insulating material !! this would stop the resonance , I used chery bombs on my ZM to de-cat that, could do with an old Cat to set up a Jig Anyone ? Ste .. I could help you with an old cat/cats but you will need a pair as they are handed. Let me know if I can help you further. Alex. Thanks for offer alex , but could do with someone a bit closer and willing to lend them me for about 2 months as I tend to take my time mind you dont think it would take too long to fab up a jig but just incase as I rather busy at times !! anyone can I please borrow your cats for a few months at the most I prommis I will take care of them and return them as you gave me them.... Oh not the pussy ones btw Ste .

Thanks for the info I could fabticate a 50mm stainless perforated pipe with 80mm outer wrapped with an insulating material !! this would stop the resonance , I used chery bombs on my ZM to de-cat that, could do with an old Cat to set up a Jig Anyone ? Ste ..

Hi all I am thinking of fabricating some nice stainless de-cat pipes for my Z few questions 1st 1 is their any lamber sensors in the cats 03 plate . I know this will make it a bit noiser but will I need any other mods ? Will I get a warning light on the dash ? Thanks Ste .

I suppose it depends on where or who drilled the holes in the 1st place !! I want to remove my front long black one as fitting a private plate which is half the length , if the holes are spaced wide appart you will see them so I will have to get some new long plates made up best thing to do is take your front plate off and have a look Ste .

Thanks for that but £140 I may as well use my tom tom and use the screen as a dvd player Ste .

Hi everyone found out today i am using version x5.1 someone said I can get a copy of version 7 europe !! would like to up date please help anyone ? thanks in advance Ste .

Thanks for replys , what I did with my TVR someone had theirs off the road their plenum was worse than mine I had it bead blasted and powder coated fitted it to mine and gave the my old one ! they were happy because mine was in better shape than theirs and kept theirs origional plus I gave them a drink thus mine was only off the road for a few hours but I dont want it polished as the car is blade silver thought it would look good the same anyway I probably will do this over winter now when the car is garaged Thanks .. Ste

Hi their has anyone got a spare plenum ? or what ever you call them in z land ... mine is corroded and I would like to get it powder coated so once done I will give you back mine , its not that bad just dull , but I like a clean engine bay Thanks Ste .

yes I am if old owner aint got one !! found one on fleabay for 55 but think it will go for more so will take you up on that offer hold it for a day or 3 will pm you soon TA Ste .

Yea look like they bolt off !! Ste.