ceaser

hi all checked the fuses, they all seem ok. and ive also noticed that the wing mirrors will fold in both sides but i cant adjust the passenger side one, the drivers one is fine though. all i can think of now is that ive damaged the pins in the connector block or damaged the wiring when i threaded the speaker wire through the rubber joining piece. both options are not good as my hand is too big to get a grip on the inner (drivers footwell) clip holder - took me nearly 90 minutes to locate it, and the door loom is densly packed with wires. Electrics are not my strongpoint! looks like i will have to take it all apart again tomorrow to check it - the girlfriend is going to kill me, i already delayed taking her out today so i could do the car...... does anyone know what the noise means tho? is it related to the problems im having or should i be really worried???

Hi all first post for me and typically it has to be about a problem! Just installed new speakers and wire into the doors to replace the crappy bose system. The passenger side was ok but the drivers side gave me a hell of a job as i had problems locating the internal loom clip back into place. But after much scrabbling about in the drivers footwell andremoving lots of skin off my hands it was finally done and the door loom clip went back into place, job done - or so i thought... I put the key in the barrel to check the electric windows but as soon as the key touched the barrel there was a loud waring noise eminating from what seemed to be the rear view mirrow. The noise stayed on even though the car would start. On closing the door the noise stops but with the key in the barrel, as soon as you open the door the noise starts again, even with the engine running. This noise was not there before! Also, the passenger door wont now unlock with the key fob (2 presses) i can only unlick it using the button on the drivers arm rest, though it locks when i use the fob to lock the car??? And worst of all - i cant open the boot now. it wont unlock even with both doors open, car on, car off, anything. i know how to unlock it with the emergency release but thats a temporary fix. Ive taken the wire out of the loom clip just in case i had knocked a pin out or something but it hasnt made any difference.The windows work, as do the other door panel controls its just the central locking which now seems a bit broke. does anyone know what might have happened or what the warning noise is trying to tell me? im more then a bit worried that ive buggered my perfectly fine Z up by trying to 'improve it' cheers for your help guys.