Jump to content

yeti

Members
  • Posts

    125
  • Joined

  • Last visited

Posts posted by yeti

  1. sorry to go :offtopic:

    But how come you couldn't fit in with these seats,

    Surely they couldn't of been higher than the standard leather?

     

    thats what i though, but due to the buckle strap fixing bolt being slightly too long just after it goes through the welded nut and so clashes with the side of the carbon bucket which meant i couldnt get them to sit at the lowest point on the side mounts, only the middle.

     

    i think i'll probably have a go in the spring time when it gets a little warmer as no one wants them and see if i can either shorten the bolt or modify the side mounts slightly. tbh i was that fecked off when they didnt fit that i wanted to thow them in the bin so i didnt try anything else.

     

    I have a set of these at home si i think i'll do some tweaking and i should be able to fit them once i get the chance

  2. ok so its still doing it, driven 600+ miles since i noticed it. The battery is still draining when left alone for more than 12ish hours to just enough to not start the car (just under 12v on the guage), but as soon as its started you can drive anywhere and providing its a little while to recharge the battery it's fine to sit for hours and then restart (ordinarily sitting around 15v when driving and sitting after along run). Fortunately i tend to get back from work late and i start early so it doesnt have time to drain enough ordinarily... i'm carrying a spare battery and jump leads in the boot just in case though :)

     

    The battery seems ok, the alternator is working fine as its re-charging but the airbag warning light is still flashing at me. I havent yet had the time to remove the drivers seat i removed to trial fit new seats a while ago, as i want to check the wiring underneath.

     

    Hoepfully i'll have time this weekend to check it all out properly

  3. I dont understand all the comments about the bridgestones being the worst tire in the world? Nissan and Bridgestone spend a fortune on R&D and although the tire probably isnt suited for the most extreme requirements is anyone here actually qualified to comment and say they are inferior tyres?

     

    I know a chap who was one of the ride and handling test engineers when the z was being set up for uk roads and when he did some work on my car the other week he actualy commented and said it was good to see a z with some decent tires on still not the cheap ones people seem to throw on alot of the time

  4. Yeah chers fellas

     

    i'm gonna try and steal a multimeter at some point today and get out there and have a look but for now i have the efficient 'spare battery' jump techique! - luckily i have a few batteries from by Corrado on the garage on trickle charge and they are man enough to start the z.

     

    O if any ones thinking they'll be ok if they get a flat battery cos they have a big diesel car like me thaen be careful, The Battery Nissan puts in their new Xtrails isnt big enough and neither is the battery in a diesel passat but i suppose theire only 4 cylinders so that might explain it

     

    Mine still under Nissan delaer warranty, any idea if battery's are covered?

  5. Can anyone explain why my battery was flat this morning?

     

    56 plate Z, 35k used every day on a 120miles total commute.

     

    Got up in the ice this morning expecting to go outside and start the z up to warm her and the heated seats up and the battery was flat as a pancake.

     

    The was nothing on when i came to the car (lights/indicators/heated seats etc all off)

     

    Has anyone had their battery drain in 12hours before? It wasnt locked, would that make a difference?

     

    cheers

     

    andy

     

    MODS: couldnt see the appropriate subforum so i put it in here

  6. The best place in Bedford is http://www.stswheelalignment.co.uk/ they have done several of my cars over the years and always freindly and good service. If you do decide to go there gimmie a shout as i only live 5 mins away :thumbs::bounce:

     

    Mark, dont use them, they have scratched 2 different sets of split rims on my cars over the past few years!

     

    I dont know of a place i'd trust in bedford for laser aligning, the only other one i know of is the TT shop in kempston, but the owner is a knob and after one of his fitters refitted my corrado rear disc and bearing without any greae causing it to lock solid at speed :scare: then denied responsibility even though it happened 7 miles from their garage and when dissasembled the bearing fell out in pieces with dust on it!

     

    I know this isnt the most helpfull to the original question but i tend to go to my mate Malcolm Good at Formula one on elms farm (i think he was with you when you knocked the z) as the boys there can do it without damaging anything with the old fashioned equipment

  7. If its the same as Infiniti, the salesman I spoke to said for it to "heal", it was only on scratches (paint chips can be too deep) and they have to heat up the paint to heal it apparently. He wouldnt say how they actually do it though.

     

    He probably didnt know :lol:

     

    I am ony commenting from memory as it was 3-4 years ago when they were developing the paint when i was working there. Pretty sure it wa only scratches, it was something to do with the mollecular structure of the paint but not sure of the exact details as i wasnt involved

  8. Lookss like a lovely car, very jealous! i'd have gone for the graphics too :teeth:

     

     

    One question though, I thought the self healing paint was only on the metallic ?

     

    :blush:

     

     

    It stays active for about 4 years and will self heal for small nicks and scratches as the paint doesnt fully go hard untill that time (i'd imagine environment, care and conditions will effect this though)

     

    It does work but its not magic so dont expect mirracles

  9. Woth mentioning what engine the GT is, the diesel and the petrol had 170 PS so either a 2.0 TDI or the 1.4TSI ?

     

    As for GTI's check with the supplier as the new GTI's had a differing fuel system to some petrol golfs (FSI) and the mk5's would have the 2.0TFSI so worth seeing if the software can control the differing fuel rails

  10. I would take these if only my ass would fit into them! lol :lol: I need the XL spg seats! lol..

     

    can provide a bullsh1t weight watchers calorie counter book if that helps ;)

     

    Unfortuantely the seats wont be right for everyone but tbh if a bit shorter than me and of slim to average build the fit'd be great, the lad opposite me who races in his spare time has problems getting a seat narrow enough, so i'm sure these'l be perfect for someone!

  11. Hi eveyone

     

    I'm having a clear out so i've put these seats on ebay, if you know anyone who might be interested let them know, the auction finishes tomorrow night.

     

    Bidding starts at £500, no reserve, these have to go

     

    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200498618677

     

    Cheers

     

    Andy

     

     

    Perfect for all you Carbon Fibre Nutters out there, 2 Black Leather Carbon Fibre Bucket Seats made by Border who supply quite a few of the jgtc teams with their race seats B)

     

    DSC01236.jpg

     

    DSC01237.jpg

     

    DSC01242.jpg

     

    They are a direct replica of the Recaro SPG race seat, but Recaro never did theirs in carbon fibre! It has 5 holes for 5 or 6 point harnesses (the 5th hole is between the removable thigh and arse cushion)

     

    DSC01251.jpg

     

    DSC01252.jpg

     

    DSC00588.jpg

     

    DSC00589.jpg

     

    The lower back, bum and thigh bolsters are velcro'd on to allow easy cleaning.

     

    DSC01240.jpg

     

    Also worth mentioning if your waist is above 36" you might not fit as these are very snug seats, they only weigh a few kilo's if that so a great way to reduce the z's hefty weight

     

    I bought them for my Corrado R32 4wd Project but thats when i was building a show car, the corrado's build has turned into a track car prep now and these seats are too nice for that! So apart from sitting in one of the seats to play on the playstation when they were in the house (sad maybe but fun :D ) they are barely used.

     

    So there you have it 2 almost unused leather buckets, the carbon on the base has a few small marks from fitting but you have to really look for them, and there is a small nick to the leather on the edge of the thigh bolster on one seat.

     

    DSC01241.jpg

     

    the buddy club drivers side seat rail is included in the sale as was brand new before i trial fitted it

     

    DSC01248.jpg

     

    DSC01250.jpg

     

    They are v easy to fit, took less than an hour to do one and i was being v carefull, just undo the 4 bolts that retain your z seat, remove your battery terminals. Unplug the harnesses under the seats and it'll look like this

     

    DSC01245.jpg

     

    then remove the buckle from your seat, fit to the new seat runner, lower the seat into position, connect the buckle sensor to the harness again and fit a 2.2 ohm resistor to the aribag connector. Bolt the rails to the floor, set the height of your seat and tighten up the bolts on the seat side brackets and your sorted

     

    DSC01243.jpg

     

    If you want to see any more pics please just ask and i can email them to you

    cheers

     

    Andy[/b]

  12. wtf so some tosser it a vinyl wrapped neon eblazened rep mobile can set his gun wrong, achieve 400 fines a day, get commended on exceeding targets and probably a promotion and then then all the unfairly charged motoists keep the traffic legal system in business, what a load of shite!

×
×
  • Create New...