Jump to content

v3euk

Members
  • Posts

    29
  • Joined

  • Last visited

Posts posted by v3euk

  1. Sorry for the confusion, not a actual double DIN head unit, just a double DIN touch screen (Theres a lilliput one quite cheap on ebay) - i won't have a headunit at all - just two touch screens, so i want to route the sound through from the PC to the amp directly.. so i guess i'm asking what connections the standard amp and speakers have.. do the differ from standard ones? - I don't really want to swap out the speakers immediately, as i was hoping to do the install in stages, but i think i will defently have to swap the amp? Without actually seeing the current audio setup on a car its hard.. i'm a planning freak and want to know what i'm getting myself into by buying a 350Z! - And if i start buying the bits now, it won't be so noticable on my wallet!

  2. When i've bought my 350Z, i'm thinking of doing a car pc install, but to get the sound from the pc to the speakers, sounds like i will need a new amp with RCA inputs.. from what i've read the standard systems don't have RCA inputs.. so my main question is just to verify that..

     

    Now if i replace the amp, is it necessary to change the speakers throughout the car straight away (are they connected with normal connections)?

  3. Hey,

     

    When buying a JDM, they have been converted to MPH already generally?

     

    Now does this conversion now mean that any speed output from the OBDII port will be in KM/H or MPH?

     

    Also, are there any other downfalls of having a JDM concerning the dash or generally around the car, i know the stereo will need to be replaced, and sat nav will be in japanese, but apart from these am i missing anything?

     

    Thanks in advanced

  4. So, i'm looking to buy a 350Z soon, and i'm just doing research on how to replace the audio system.

     

    I'm thinking of the car PC route, using the following Double DIN touch screen (will add a second monitor to the cubby - haven't choosen yet):

     

    http://cgi.ebay.co.uk/Double-DIN-Lillip ... 240%3A1318

     

    Assuming i buy a Z with steering controls, i've looked into a way of using these with it:

     

    http://www.shipsound.com/product_info.p ... _id=102843 - IR receiver for PC

     

    http://www.advancetec.co.uk/acatalog/info%5f728%2ehtml - Steering wheel controls to IR

     

    Now does this look like it would fit the Z's steering controls? - As long as i can get the IR signals sent, i'm good to go..

     

    Then finally would be the sound from the PC to the factory amp.. now i have no idea about the connections on car amps, but im assuming this method should work?

     

    http://www.zzounds.com/item--HOSYRA154 - PC to RCA connector wired to:

    http://www.crutchfield.com/p_136CLR2SW/ ... ml?tp=2610 - RCA to amp connectors

     

    My main question is does anyone see any major problems with this or are there any other solutions available that i have overlooked?

  5. Thanks all

     

    Quick question about the steering controls, am i right in saying that the left hand side ones control the bose system? And then the right hand side is cruise control etc. Then if the Z has a birdview sta nav, this is controlled within the birdview cubby? So to keep the steering controls, i'd only need a stock head unit? Or can these controls be used with certain aftermarket head units?

×
×
  • Create New...