D12BHP
-
Posts
82 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by D12BHP
-
Hi All.. May tag a long if the car is done in time what date was this again, I have my car going into Dan's place at Advance Motorsport. The car is booked for 27th Sept hopefully no longer than a week or two... By the way not seen the pics, any one got the link....?? Cheers
-
Hi All, Anyone with a modified forced Induction Autobox 350z ? Need to know any recommended tuners and ECU set ups? Thanks
-
Thanks for the comments!.... wanted to see if it was a common problem or ????? I here Dan from AdvanceMe is good....
-
Hi all, I have a forced induction Z having problems with over fueling?! I have stock fuel pump and a addtional Walbro pump is this to much ... See spec for the car below... Any advise would help - I guess the piggy back ECU I have is not helping the problem.... Cheers
-
Hi, I have seen alot about the Plenum Intake & spacer... I have 2003 Jap Import Fairlady Auto. Do I .. Should I ? etc...
-
Hi all, I have a CUSCO RS 2 Way Diff for Manual Nissan 350z it is brand new boxed, was sent in error as I have a Auto Triptronic gear box! It is costing me 120GBP to send back, currently on e-bay for buy it now 550GBP or bidding at 450GBP. I paid 550GBP direct from Japan + Import Tax! Let me know if your interested?
-
I was there... good day hit 13.6 but have learnt I should have done alot better the piggy back ecu i have is restricting me!!
-
Copper Red to Green and I have 20" Volk Racing GT-C Gold rims.. Yeah they will effect the 1/4 mile, but I will running the 1/4 with standard rims at shows and drifting until the tyres pop!!
-
472.6BHP / 7635RPM 355.0LBFT / 6397RPM
-
is being repated? ned to set up series link
-
I had a similar problem turned out to the window regulator and not the motor...if your hear the clicking should be ok??
-
No Gunmetal Silver... D12BHP
-
Its the DAZ Tech ECU I have, causing problems on fuel mixture!! Spoke to Dan from Advance Motorsport he has advised to get either AEM or MOTEC £££££!! I do feel my car holding back some what, good to hear all this feedback as i expected better!! So whos this crazy looking bloke?
-
I think I hit 110mph, it was so windly on the day the slips went missing!! When my car was standard I was hitting 14.47 sec - on a 2003. I have just found out my car ECU is causing fuel mixture issues so hope to get that done and re-run.
-
Just updated my Signature: I have got Oil cooler and bigger oil pan - car sits below 90c and on hard accelartion over quater miles reaches 110c at most and cools very quickly. If so what internals?
-
Just updated my Signature: I have got Oil cooler and bigger oil pan - car sits below 90c and on hard accelartion over quater miles reaches 110c at most and cools very quickly. If so what internals?
-
No the Engine is still Standard...
-
Hi though I would post my time at Santa Pod, to see how other 350z are doing on quarter miles with mods.. May give you and me ideas for more mods to knock those mill seconds off!! 13.6 sec - 1/4 mile With out reaction time ... 12.8 sec
-
Please see signature for mods? Went Santa pod at the weekend did 13.6 sec 1/4 with 0.752 for reaction time, not bad for a quater mile. Once you hit the 110+ the car does not have enough torque to keep the acceleration up,...
-
Hi, Can anyone help? A recommended Piggy Back ECU or A Standalone ECU? Car is running rough after mapping numerous times. See mods below, I am running a DAZ Tech ECU Management Unit. Thanks Sonney
-
My 350z Build
