Jump to content

Recommended Posts

Posted

Im slightly confused as to the wiring of the headunit! I have a red and white phono and a yellow and black phono from the car harness. However i seem to need 3? Red and white for front speakers another red and white for rears and then the yellow and black for sub?

 

Maybe im doing it wrong?

 

Cheers in advance!

Posted

Red and white for front speakers; black and yellow for the rear and sub (assuming you have Bose setup)

 

As said above, the sub is fed by the same output as the rears.

Make sure you have the blue wire connected, this is the remote power on for the amp.

 

If all is working except for the sub, try checking you don't have a high pass filter set - this would stop the rears receiving low frequency sounds ie bass that the sub would play.

 

 

 

 

 

  • Like 1
Posted

Il have to have a look at this tomorrow :) so yellow and black plug into the sub input for headunit? And set it to high pass filter?

 

I do indeed have bose and blue wire is connected as it should :)

  • Like 1
Posted

Yellow and black into the rear speaker output of your headunit.

 

Sub output on your headunit will not be used.

 

I asked the question myself last year when first replacing the Bose HU

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...