Adrian@TORQEN Posted September 4, 2013 Posted September 4, 2013 WINDOWS NOT WORKING PROPERLY AFTER DOOR CARD FITED BACK? If the windows do not close automatically or the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system: 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. Quote
overthereinabox Posted January 9, 2014 Posted January 9, 2014 Wish I'd seen this earlier! Thanks for the info..... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.