Badger Posted August 21, 2012 Share Posted August 21, 2012 I've only had the 370 for three weeks, but over previous cars the clutch biting point seems quite high in relation to the overall pedal travel. Is this normal, and if I'm a little quick releasing and not applying any gas I get a slight judder when pulling away (like a slip, but literally very slight), and wondered if a) this was normal and if I should be looking at sending it into the dealers. Its only got 6400 miles! I dont think even that can be said is wear and tear. Cheers! Quote Link to comment Share on other sites More sharing options...
Will370z Posted August 21, 2012 Share Posted August 21, 2012 Dont worry it took me quite a while to get used to the clutch on the 370 as i found it one of the biggest differences to the 350. You only need to touch the clutch to be able to change gear. Quote Link to comment Share on other sites More sharing options...
Badger Posted August 21, 2012 Author Share Posted August 21, 2012 So its quite high normally then? I think the judder more so when cold could be the bearings or plates which seems to be a common issue. Quote Link to comment Share on other sites More sharing options...
Jordan777er Posted August 22, 2012 Share Posted August 22, 2012 If you haven't done so already, you can remove the helper spring and that makes the clutch much easier to work. There is also limited adjustment on the pedal itself to bring the pedal slightly closer to the floor, but that doesn't change engagement much. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.