E-drive electronic throttle controller

[marshy167]

Hey i have just bought the e-drive electronic throttle controller. I have wired it all, but i have no power to the unit - no display. Instead of sending it all back, can someone let me know the basic connections and where, to make sure that i have not missed somethig obvious...

 

Has anyone get one? Can anyone help?

 

Marshy167

[chippy]

I had the same problem with my one that I bought. I tried taking the pins out and putting them directing into the OBD connector - that didn't work either, so you may be wasting your time.

 

I returned it and got a replacement which worked first time.

[Darren-B]

Is this the same as D1 Spec controller?

[Darren-B]

If it is, they dont work on the 2007----- 313 cars

[marshy167]

I believe it to be very similar to the D1 spec module. I think i has the same basic connections.

 

My car is an 05 import, so it should work.

 

There is a spare blue wire which fits into the lighting circuit and opts reverse out of the throttle control. I have not put wired this in, will it still work?

 

I have taken the accelator connector out, put in the the e-drives connector and the other end goes into the spare socket on the right hand side under the fog and vdc switches.

[chippy]

 

There is a spare blue wire which fits into the lighting circuit and opts reverse out of the throttle control. I have not put wired this in, will it still work?

 

I have taken the accelator connector out, put in the the e-drives connector and the other end goes into the spare socket on the right hand side under the fog and vdc switches.

 

 

I had an 05 too, I didn't connect the reversing wire in and it was fine.

[marshy167]

My replacement works well, so thanks for all your help. The only issue i have now is that the sport mode makes no diffeence and the eco 5 mode makes my engine cut out!

 

Any help?

 

Marshy167

[dyla350z]

Get an uprev instead