yokomo Posted December 16, 2009 Posted December 16, 2009 So my front lip has arrived , offered it up to the bumper and it looks ok but i cant for the life of me think how im supposed to work out where to drill the holes to hold it on. it looks liek it shoudl ave 2 either side under the arches but **** me if i can see how to mark them on the lip ! help needed ! fianlly many screws later ... Quote
Gaz Walker Posted December 16, 2009 Posted December 16, 2009 Hi Chris, You've got the right idea, how can you not mark them? Quote
yokomo Posted December 16, 2009 Author Posted December 16, 2009 well im not really sure how to go about it tbh . as once the lip is in place i cant see how to get to the other side of it and mark through , unless take the 2 screws out will let me to inside the arch . cold snowy weather aint helping me either , might wait til things clear up abit . Quote
Chilli Red Posted December 16, 2009 Posted December 16, 2009 well im not really sure how to go about it tbh . as once the lip is in place i cant see how to get to the other side of it and mark through , unless take the 2 screws out will let me to inside the arch .cold snowy weather aint helping me either , might wait til things clear up abit . Plus you need another pair of hands, so whos local? Quote
yokomo Posted December 16, 2009 Author Posted December 16, 2009 yeah anyone done one of these before in the herts area ?? Quote
yokomo Posted December 16, 2009 Author Posted December 16, 2009 ah crap i just tried to undo one of the bolts holding the arch liner on and it sheard right off !not looking good to start wiht here am i ! Quote
bhavin85 Posted December 18, 2009 Posted December 18, 2009 Did you get anywhere with this? Im not to far away from you so more then happy to give you a hand fitting when I get back to England...mid jan Quote
AmyZed Posted December 18, 2009 Posted December 18, 2009 good luck fitting it... thatlll look so good im in herts and would help, but i have no clue either so ill stay in the warm! Quote
tmJak Posted December 18, 2009 Posted December 18, 2009 If it's a genuine Veilside youll have to cut a couple of chunks out of your bumper. I'll take pics of what the bodyshop did you mine if you want tomorrow? Mine was attached with a load of rivets and all sorts to make it stable and secure. Quote
yokomo Posted December 18, 2009 Author Posted December 18, 2009 non genuine . if you got some pics that would help. i offered it up and it looks to fit in place ok but as it has no mounting holes im thinking it may be quite hard to get them marked up. looks liek it takes them at the edges like the mines Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.