Jump to content

GROUNDING KITS ???!!!


Recommended Posts

Posted
has any one fitted one of these and thought this has done bugger all !!??

 

Nope. I noticed the difference straight away. Hard to remember what it was like previously though :headhurt:

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

 

That surprises me, who's kit did you fit :?:

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

 

That surprises me, who's kit did you fit :?:

 

I darent tell you :blush:

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

 

That surprises me, who's kit did you fit :?:

 

I darent tell you :blush:

 

TBH as long as the cable is high grade copper 4g wire and has been installed correctly it shouldn't matter who's grounding kit it is, you should notice a difference, JDM, US or UK models

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

 

That surprises me, who's kit did you fit :?:

 

I darent tell you :blush:

 

TBH as long as the cable is high grade copper 4g wire and has been installed correctly it shouldn't matter who's grounding kit it is, you should notice a difference, JDM, US or UK models

 

I was hoping to notice a difference, but like I said before, mine must have been well earthed from the factory..or I,m just insensitive to it all :)

Posted

I personally didn't notice any difference on idle mine was smooth anyway, the place I notice it most was pulling away from islands it's so much smoother you don't have to rev so hard just to pull away, you can also be lazy and leave in 2/3 without any judder.

Posted
I personally didn't notice any difference on idle mine was smooth anyway, the place I notice it most was pulling away from islands it's so much smoother you don't have to rev so hard just to pull away, you can also be lazy and leave in 2/3 without any judder.

 

I,ll persevere with it, and hope to be convinced as theres no way I,ll unbolt it all ! looks trick under the bonnet though :thumbs:

Posted
I personally didn't notice any difference on idle mine was smooth anyway, the place I notice it most was pulling away from islands it's so much smoother you don't have to rev so hard just to pull away, you can also be lazy and leave in 2/3 without any judder.

 

Top bit of kit if you ask me :thumbs:

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

 

That surprises me, who's kit did you fit :?:

 

I darent tell you :blush:

 

LOL,,, Tim didn't you buy spill's kit but not directly from him :blush:

 

Defo smoother tick over/ pull away :thumbs:

Posted
Are they simple enough to fit yourself?

 

Will have to get one I think......

Yes dead simple half hour job...I put one on a couple of nights ago ..still waiting to notice any improvement though... :thumbdown:

Mine must have been well earthed from the factory :p:blush:B):headhurt:

 

That surprises me, who's kit did you fit :?:

 

I darent tell you :blush:

 

LOL,,, Tim didn't you buy spill's kit but not directly from him :blush:

 

Defo smoother tick over/ pull away :thumbs:

Yes thats why I darent tell him :blush:
Posted
Mine's been ordered, so thats another thing that I have to get on the car asap! :D

 

your getting into this modified scene Mark :thumbs:

 

I'm addicted to anything Zed, as well :blush:

Posted
Mine's been ordered, so thats another thing that I have to get on the car asap! :D

 

your getting into this modified scene Mark :thumbs:

 

I'm addicted to anything Zed, as well :blush:

 

Sarnie are you going to the JAE ??

Posted
Mine's been ordered, so thats another thing that I have to get on the car asap! :D

 

your getting into this modified scene Mark :thumbs:

 

I'm addicted to anything Zed, as well :blush:

 

Sarnie are you going to the JAE ??

 

When is it and where and what is it?

Posted
Mine's been ordered, so thats another thing that I have to get on the car asap! :D

 

your getting into this modified scene Mark :thumbs:

 

I'm addicted to anything Zed, as well :blush:

 

Sarnie are you going to the JAE ??

 

When is it and where and what is it?

 

Jesus dont you read any other posts http://www.350z-uk.com/forum/viewtopic.php?t=587 :p

 

Didn't know what the thread was all about and I couldn't be bothered to read 8 pages so I didn't :blush:

 

But now I have, I'm sorely tempted......especially if I have the UY!!! :thumbs:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...