Willbof Posted 6 hours ago Share Posted 6 hours ago Just got round to kicking up my GK Tech lock kit and came across a few concerns. V3 lock kit Rack spacers Inner tie rods. It would appear that I have considerable lock improvements so that is great. I took my time trimming the inner rods to get maximum engagement, probably cut them 3 times each until I am reasonably happy. Now the issues, on full lock the 'heim' joint is now the bump stop as it contacts the lower shock bolt. I have removed the OEM bump stops but I think with a small trim it would probably be wise to reinstall these. On the opposite side the Hel brake line comes quite close to contacting the shock due to the enormous 90 degree fitting they came with. I also noticed that the spacers aren't being utilised at full lock as the joint/bolt interference stops the rack moving any further. Anybody have any experience with this kit? My suspicion is that I need the lower arms to utilise all the other mods which I'm a bit upset about as I've already spent too much! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.