philipcooper303 Posted November 16, 2023 Share Posted November 16, 2023 Hi I have a 2005 350zroadster just checked the clutch fluid and its muddy ,is it time for a new slave cylinder and flexi , clutch pedal is a bit graunche cheers. Quote Link to comment Share on other sites More sharing options...
FossilFish Posted November 16, 2023 Share Posted November 16, 2023 Just done this on my drive. I bought the aftermarket set from Horsham Development https://h-dev.co.uk/product/350z-de-clutch-slave-cylinder-braided-clutch-line-and-high-temp-brakeclutch-fluid-kit/ Very simple job just make sure you prime the slave cylinder with fluid and gravity bleed it for a while prior to bleeding. Quote Link to comment Share on other sites More sharing options...
philipcooper303 Posted November 16, 2023 Author Share Posted November 16, 2023 Thanks FossilFish ,I think I will order this cheers . Quote Link to comment Share on other sites More sharing options...
FossilFish Posted November 16, 2023 Share Posted November 16, 2023 I think my fluid was old and boiling point lower. The one in the kit is better quality fluid, I think that combined with braided hose makes the pedal seem more engaging. I used a flare wrench on the clutch line as you don't want to round the nut. Reuse the heat wrap as the exhaust is close by. This video helped alot. Quote Link to comment Share on other sites More sharing options...
philipcooper303 Posted November 16, 2023 Author Share Posted November 16, 2023 Thanks for that . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.