Argyll

Sorry it's Falkirk. It should have read that in my details at the side but for some reason it's gone.

A full set (4) of 17" allow wheels that came from my Nissan 350z. They are in good condition apart from two slight kerbing marks. I sold the car last summer with another set of wheels so these are now surplus to requirements and are taking up vital room in my garage. The tyres are: Front- 2 x Bridgstone GR8000 225/50/17 one 4.2mm and the other is 4.4mm tread Rear- 2 x Kumho Ecsta's KH11 235/50/17 both 5mm tread Sorry but I can't sell the wheels separately. Due to the size of the wheels, pick up would be preferable but I can deliver to within a 30 mile radius but you would have to pick up the fuel tab which we could arrange or alternatively you could arrange your own courier. I'm asking £300 ono

http://www.ebay.co.uk/itm/160859061237? ... 1555.l2649

Thank you.

I received this email from someone on Ebay. "The PCD may match the vehicles you noted, but you would also need to check the centre bore size, which should be noted on the alloy inside, CB or ET. Jeeps and Voyagers need 71.5 and anything smaller than this won't fit." Any comments?

I'm just about to advertise my 17" 350z wheels/tyres that have been sitting around in my lock up for some time. I'd like to know what other cars the wheel configuration will fit? I'm sure I read on here some time ago they also fit BMW's but I can't find the post. Also do they fit all Nissan's or just the 350z?

Bump I've decided to put this back up for sale if anyones interested. I'm asking £8000 no offers please. I'll also chuck in the private reg (V26 SMC) and the 17" standard wheels so you can use over te winter.

Yeah it was auto glyms polish. I'll pop to halfords tomorrow and get some of the coloured stuff that someone mentioned.

I've waxed my car today but I've noticed little white flecks at the front bumper where the polish has filled minute stone chips and which I cannot get to. Can I buy grey (gunmetal) coloured polish to avoid these little white flecks?

I have just had my Ascari Penta wheels refurbished again. I need to reattach the studs to the wheels. last time I used some tiger seal that someone recommended but it's expensive and I only need a small amount and you need to chuck the tube out after use so most of it will be wasted. Are there other alternatives I could use? I was thinking about normal silicon but I read it may cause an adverse chemical reaction to the wheels. What about no nails? When I say studs I mean the 20 small hex bolts that go round the rim to imitate that it's a split rim.

I bought a new battery today from Halfrauds but the one stated on their guidance books (HB005) was a different size to my old one and the pegs were larger meaning I would have to change the terminals leads to suit. I also would have struggled trying to get it to fit in the battery tray. I found one the exact same size as my old one but the amp hours were only 330 as opposed to the one I'm told I should use which is 480. However my old battery was only 300ah and it worked fine for about 3 years. Would it make much difference? I'm wondering if the battery is different for JDM's as the battery tray on mine would struggle to fit Halfrauds recommended one.

To save me diverting from my journey is there anywhere around Central Scotland that I could buy a battery for my 350z for around the same money i.e. £40-£50?

You are a diamond mate! Thank you very very much.

I thought this was a good deal for a new battery. http://cgi.ebay.co.uk/Nissan-350Z-3-5-P ... 27b700903c Only problem is I need to collect from Manchester but I'm passing by that way soon anyway. I'm unsure of the dimensions as I had to chuck the last one out. Can someone confirm please that the dimensions are okay. They are Length 230mm Width 175mm Height 225mm.

Thanks guys happy days indeed! By the way I did do a search you know but nothing came up when i searched 'tax'!!!!! I don't suppose I can claim it back retrospectively