Jump to content

Andy Nefyn

Members
 View Profile  See their activity

  • Posts

    10

  • Joined

  • Last visited

 Content Type 

Everything posted by Andy Nefyn

  1. Andy Nefyn
    That’s reassuring, thanks. What do you think of these oil pressure numbers: Cold 1800rpm 100psi Hot idle 950rpm 45psi Hot 2000rpm 70psi Hot 4000rpm 90psi thanks Andy.
  2. Andy Nefyn
    Manual definitely my preference for any car but sounds like the auto box is ok though. Lots of nice looking autos around,I’ll try a few and take it from there. Many thanks.
  3. Andy Nefyn
    I currently have a 350 but I’m thinking of trying a 370. Should I go for manual or automatic? Any other tips appreciated.
  4. Andy Nefyn
    My 350 is a 2008 HR on 83,000 miles. It never burns a drop of oil and pressure seems fine. Should I worry about the gallery gasket? I hear horror stories!
  5. Andy Nefyn
    Yesterday my main beam and rear wiper wouldn’t switch off. After c30 minutes they seemed to sort themselves out. Could it be water? I don’t use her in the rain but she is kept outside. Many thanks in advance.
  6. Andy Nefyn
    My 2008 350 (83k miles) has started a low pitch whirring noise. The pitch varies a little with speed. I'm sure its not from the engine as it is still audible when the clutch is in and free wheeling. Could it be the diff or bearings?? Any advice much appreciated.
  7. Andy Nefyn
    My 2008 350 (83k miles) has started a low pitch whirring noise. The pitch varies a little with speed. I'm sure its not from the engine as it is still audible when the clutch is in and free wheeling. Could it be the diff or bearings?? Any advice much appreciated.
  8. Andy Nefyn
    Thanks for the tip. Fiddled about with the lock and put some vaseline in it and it seems to work fine now.
  9. Andy Nefyn
    The boot on my 2008 350Z won't open. The button has gradually been getting less responsive over the last week. Now there is no click when I press it and it won't open at all. Any ideas?
  10. Andy Nefyn
    The boot on my 2008 350Z won't open. The button has gradually been getting less responsive over the last week. Now there is no click when I press it and it won't open at all. Any ideas?
  11. Andy Nefyn
    I’m new to 350z and looking for a recommend supplier for original or better parts? I need drop links and a wheel bearing, for now. Many thanks, Andy.
×
×
  • Create New...