Zedhead21

For anyone else having this problem , it turns out I'd left the bottom vacuum pipe of the bottom of my air intake pipe from the filter to the throttle body from where I'd removed it to get at the spark plugs previously

I'm getting a check engine light and a P1273 fault code on my 04 350z , it's got berk high flow cats , rev up map , pop charger intake filter and scorpion cat back , I'm guessing it's due to an o2 sensor as the exhaust seems to be popping a bit more lately and I'm gettting slightly worse mpg so makes me think it's running a bit rich , need to sort it before the mot as I doubt it will pass emissions like this , anyone got any suggestions where to start ? Thanks

Also sure it will look good in black , you'll be able to get a mirror shine on it haha Sent from my iPhone using Tapatalk

The shop actually had a bit of trouble , i was originally quoted £180 fitting but when they sanded it back the fibreglass seam wasn't joined properly so I figured I was in pretty deep at this point and asked him to repair it and fill in the edges to get it sat perfect , worked out £300 all in , considering the spoiler only cost £80 I'm fairly ok with the price and really happy with how it looks , don't personally think you will get a much better looking spoiler to go on the z without overpowering the lines of the car Sent from my iPhone using Tapatalk

Thanks Sent from my iPhone using Tapatalk

Sorry I took so long to get back , just figured out how to post pictures haha Sent from my iPhone using Tapatalk

I know I was wondering if I'd get the full effect of the plenum spacer considering it's already been uprev mapped or whether I'd need it done again to account for the extra airflow Sent from my iPhone using Tapatalk

Thinking of installing a plenum spacer on my 2004 z it's been uprev remapped already and am wondering wether I will need it remapped again after the install , any advice on which spacer to use would be helpful , I would also like to retain the standard strut brace as I've heard if the spacer is too large you can't fit the stock strut bar on any more , thanks all

Need the exterior b pillar trim for both sides for my 350z can pay over Paypal , thanks

Just tried to attract a pic from my iPhone but it's saying the files too big :@

I went for the gia cuzzo style spoiler , was a bit of a mess up with delivery and it got sent back to poland and re posted but got here in the end , really happy with it , matches the lines of the car well as you guys said , just need to fork out for painting now

Shame you can't bring both

Matches the lines of the car well and doesn't go too far whilst still looking sporty

Think iv been converted and am gonna go with the gia cuzzo style

Cheers for the help all

Just had a look then , can't seem to find them anywhere ?

Your not wrong there thanks for the tip , will check them out now

Genuine or replica New or used as long as in perfect condition Would pay a bit more if already sprayed in the factory silver colour Thanks , James

I'm after the v2 , sorry probably should of specified that in the original post , replicas are fine too as long as the bolt holes line up properly , thanks

I'm after a nismo genuine spoiler , ideally already sprayed silver but not absolutely necessary , any out there ? , thanks

Thanks for the advice

That sounds like an absolute nightmare mate

Looking at removing the oem lip spoiler on my 350 to fit a nismo style spoiler , does anyone know how to remover it ? Thanks Attached a pic to show the type of lip spoiler I'm on about

As long as your into cars doesn't matter what your driving

Cheers