-
Posts
137 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by CLASSIX
-
-
Im booked on with NPOC, track time booked also
Never done Donington before yay
See you on the way or there David
-
Ime going, there are two other Z owners going along as well that I know of :-) I know for certain ill be on the NPOC stand and think David and Steve are as well :-)
-
Hello all, proud new owner of a 2006 350z GT Roadster and so far I'm very impressed. It's only been a week but I've not stopped grinning like a Cheshire cat.
the one and only isissue I have is with the roof, whwhich I knew about when I bobought it but has so fafar has be stumped.
I've read about the 5th bow motor issue so I took out the 5th bow motor and replaced the brushes as this seems to be the most common issue. Wasn't as difficult as I thought and when I connected the motor to a 12v power supply it buzzed into life. Happy days.
One thing I noticed before taking the motor out was when the motor was plugged in it didn't make any noise when I pressed the electric roof switch, I assumed it was because the brushes were worn out and the motor wouldn't work anyway.
However, before I put the motor back in place I put a multimeter to the plug (that goes into the motor) and there was no reading, which I think means​ no power is getting to the motor .
I've checked the relay in the engine bay, found the fuse box inside but I don't think there's fuse for the electric roof there.
So I'm back to square one, with a refurbished motor
Would anyone have any other suggestions I could try?
Thanks all.
Have you tried Bridging the switch on the brake pedal before testing with multimeter ?
- 1
-
:-) Ill take it you dont need it for project :-) n my DE
-
-
I use S4's & EXIDE both good quality and reliable
Sent from my iPhone using Tapatalk
-
Hi Ricky,
Yes I did mate but thanks so much for offering to see that for me and for filling me in on all I needed to know before buying
More than welcome, any friend of G's is a friend of mine :-) , so when you going to debut this beauty m8ty :-)
-
-
So the Sun came up, trial fit :-)
Sent from my iPhone using Tapatalk
- 2
-
Inspired by Moped Mark more to come time allowing :-)
Sent from my iPhone using Tapatalk
- 2
-
Hi guys,
I have had a good look in my owners manual for my 2011 370z and done a search on this site but cant seem to find the answers I am looking for. Can you play films via the USB port? If so, what format ... divx/mpeg/avi/mkv? Also, what format do the pictures need to be in to show as images as jpeg doesn't get recognised ;/
stab in the dark here, ok if the 370 is using the Clarion standards movies will be in divx via usb or sd card, as for pictures it should recognise jpeg, is your usb formated using FAT as FAT32 & NTFS will not be recognised.
-
On US models there is no auto on off for headlights but I believe there is a system in place for battery saving that will shut down electrical system if stuff is left on.
-
Thanks for the replies. I think I will go for sgs replacements - an affordable solution!
Thanks
David
I have used SGS for a few things, found them to be really good on customer service.
-
Sent from my iPhone using Tapatalk
- 3
-
A company called SGS do uprated ones
http://www.sgs-engineering.com/ they are based in Derby
Sent from my iPhone using Tapatalk
- 1
-
Hi Im Looking for 2005 wv2 gunmetal grey boot lid for my 350z roadster.
(Ideally wv2 colour)
A stone has hit mine on the morotway dented and cracked the paint work if any one has one please get in touch.
Many thanks
Dan
How badly damaged is it ? wouldnt it be easier to paint it ?
-
Cheers.
Yeh, thats pretty much what I had in mind
Could aly bolts be used?
Ally bolts could be. but would become compromised by road salt and weaken, better off using Stainless and greasing them up, or just use a stainless plate for the project. TBH the way the undertray and bonnet are fitted leave a lot to be desired the only reason the plastic rips is due to cheap ferrous fasteners being used in the first place, One might have believed a little more thought would of gone into what materials were used.
-
Make a Aluminium Bracket, drill and tap 2 holes into it either side, not forgeting to drill the main hole as well, drill holes in the bumper either side to match up with the holes in the ally plate and secure using stainless bolts, make sure to grease the bolts or you will get a reaction between the ally and stainless.
- 1
-
2 pac Kapcha primer
- 1
-
Thanks Dave might see u on the 42 :-)
- 1
-
should fit the roadster i believe the rear where you would fit the spoiler are the same
No it isnt
-
Hi guys, has anyone used one of the these on the stock bose system with a different HU?
PAC-ROEM NIS2 Active System Adapter for Nissan
yup I have, it is the only way to run a aftermarket HU correctly with the factory BOSE/CLARION amps, it rectifies the impedance/voltage differences between the HU and amps, doing a wiring hack is ok if you want to overdrive the amps and blow your brains out. I got mine direct from autoleads along with the standard non bose HU iso adapter, you will need both if you source from Autoleads, 5 minutes plug and play Perfect.
CLARION 505E
-
First time to the ace cafe and thought it was lovely, BIG thank you to Amy for setting this up #fashionablelate lol
Ill try to be awake for the next meet so I can tag along in formation :-) small world AOC/NPOC :-)
-
No Stranger to ACE CAFE, Love going there for meets always something new and interesting to see and chat about, Big TA to Moped Mark for fitting the new blingy bit :-) loads of ideas from everyones Z's to think about now.
Good company, great cars, always worth a trip just for the Brekky, :-|) cant wait for the next meet :thumbs: :thumbs:
- 2
Japfest - Donnigton July 1st 2017
in National Events & Shows
Posted
lol might as well all park by NPOC.