Brimstoneboy

Welcome buddy

Zed looks well , Watch out for the Zeditus , will only take swopping that aerial for a stubby , next thing you know you will be looking for FI

cheers guys

so i assume 3 to 1 is 3 parts c2v3 and 1 water ,

Also with the B H did i read you usually apply it as 4% a panel ilogikal1 ? or did i read that somewhere else (really have been reading alot of threads on here and DW)

i know i read a thread last couple days where you explained how to get the % right per panel with a drum need to re read that as i dont know flow rate on the pressure washer its a old karcher and the sticker is gone .

one last Question im sure i read that c2v3 dosnt like many types products over it , is there anything you would recommend that would go over it when on the club stand, want it to look its best even if the zed has a few chips n knicks, ones a indoor show and the other outdoor.

cheers

stuart

looking good

So after reading thru the ilogikal1 test thread decide to splurge again i i went for some Gtecnic stuffz

i got some panal wipe ,c2v3, c4 trim rejuvinator also so isopronal alchol for cleaning plastics before i stick the c4 on

im sure i read c1,c4 ,c5 are same stuff ,

also got some Zanio 10 for my leather

and a snow foam lance

so i read you can apply c2v3 over your exsiting coatings, i glazed and then waxed the car last week so didnt wanna strip it back this week , do i need to mix it with water for this or is it better neat? whats best mix ratio if so ?

if the C4 is same as C5 can it be used on my alloys was gonna get some c5 but thought id ask might save me a few quid

i was gonna buy some bilt and hammer auto foam and also some bathe + is the auto foam gental enough not to strip any coatings ive got on

or anyone got a good recommendation

So this came today from a member on here

so fitted it after work theres also a wasso plenum spacer floating about in there

bit blurry but

and finally a gratuitous washing line shot

Really Cross at myself buggered up my finish on driver side louver gonna have to redo it sigh

quite happy with other one seeing as my first attempt at painting car stuff

Ep racing Loughborough he said poss in 4 weeks ish from a supplier in Netherlands he said his last v2 he sold was bad fitment so he's got a new supplier .

Could not vouch for fitment haven't seen one of there's but consensus is they are a pita to get fitted well

Sent from my iPhone using Tapatalk

I did similar but it hurt a lot more Nissan Chesterfield, camber bolts, d washer and nut x2 and the same for the toe adjustment 108 quid 😥

I found the one I didn't shear was seized in the busher so on with that now

Hopefully you won't run into that one also

Sent from my iPhone using Tapatalk

Nah Andy it's my mates , was down at his unit he was working on his Mexico while I nabbed his tools and picked his brains 😀

Sent from my iPhone using Tapatalk

Cheers guys 😀ðŸ‘

Sent from my iPhone using Tapatalk

So Chris at Tarmac Sportz sorted me some goodies after work monday so took a day off to play with car bits

i painted my louvers

mock up on car still need to flat n polish em

and between coats i fitted these

Big thank you to Chris sorry i intrupted your BBQ .

Thanks guys

Sent from my iPhone using Tapatalk

Still not sure what im after i think its a bush in a rear lower link and front lower link , i think these are the ones with the camber D washer on them when im looking at the diagram

still not sure which i need though as theres body side and axle side when i look on the traders sites.

So i took my car to get 4 wheel alignment other week was told id have to free the Camber bolts on the rear up ,etc

I bought new camber bolts , nuts and the D washers from nissan Ouch

i tried to free my existing ones on the bucket , the first sheared but it poped out easily enough

the second i got the nut off but the bolt will not budge,even getting heavy handed with it i didnt even attempt the other 2 Bolts with the camber washers ( Toe adjustment arm ?)

gonna either heat em up or cut em out but this will ruin the bushes

without being a total tard what Bushes do i actually need to google i know which they are but not what there called so dun know what im ordering

i am a novice working on cars always paid someone but with the zed i dont mind , helps my mate has a garage and lets me use his tools and ramp etc.

sorry to be asking Dumb questions but im failing with forum seach

cheers

Stuart

Might want to invest in a torque wrench if your heavy handed, if you ain't got access to one ,it is very easy though took about a hour for me to do and I'm pretty useless round cars .

Google motordyne plenum instal should find a link for instructions can have a read before it comes .

Sent from my iPhone using Tapatalk

Cheers for photos StevoD I think if I was gonna go with that kinda spoiler would be the stillen .

Sent from my iPhone using Tapatalk

Ta for replys guys .I already follow zociety and most are massive wings,or spoilers I have zero clue what they are, I'd rather get something from over here than import or I may aswell just go with Chinese eBay .

I think the rocket bunny / ducktails need a full kit to pull off imo same as bgw

Not adverse to putting a kit on the car but it's something that will progress in stages .

Cheers Stuart

Sent from my iPhone using Tapatalk

Hi after a bit of help looking for a spoiler that will look well with grundys new louvre . I was thinking a v2 but they seem tough to get over here now and I'm dubious about getting stuff from aliexpress . Any ideas would be gratefully received as I'm struggling to visualise louvre / spoiler combos

My zee is gunmetal oem sat on 19 te37s il slap a pic on later after work

Cheers guys

Stuart

Sent from my iPhone using Tapatalk

Looks Sweet Stu

Is it not adjustable camber arm that replaces bucket ?

Sent from my iPhone using Tapatalk

Had similar other week bobbyz but the lad doin job told me if he tried to undo it could shear . Didn't charge me just said bring it back when you free em off or better still replace . Get ready if you buy em from Nissan. My wallet is still smarting.

Sent from my iPhone using Tapatalk

Leaving from m1 j 29a in a hour bud if that uelps

Sent from my iPhone using Tapatalk

Spoke to our lass told her to sit still all day lol so good chance we may make squires

Sent from my iPhone using Tapatalk

Cannot make tonight 😟 hectic day at work just done plenum spacer and I'm filthy. Doubtful about tomoz but really depends on time I finish work and if better half is alright , she suffers from M.E . will post tomoz if we can make it

Sent from my iPhone using Tapatalk

These are now sold could a mod be so kind as to lock

Sent from my iPhone using Tapatalk