MattRwebB

Is this still available?

Did you get to the bottom of this

I’m having g this issue but with a p2128 and p2122, changed the pedal sensor and plug but no luck, did you have to replace the whole ipdm? 

Did you get to the bottom of this? I’m currently having the same issue on my 350z hr

I’m currently having similar issues. I know this is an old post. Did anybody get to the bottom of this?

I only unplugged my TB to clean them, should I have unplugged the battery and ECU as well? 

Where is this article? I’m having this issue now 

I currently have a Xtreme clutch kit with single mess flywheel

Stupidly, I drove through a puddle and believe I have warped the friction plate, The clutch has only done around 30,000 miles

My question is, could I get another clutch kit to work with the Xtreme single mass flywheel??

Just about to buy one from tarmac sports new for 180 free postage, would you do 100 posted?

Sorry to bring up and old thread, mine has had this issue and I had it re mapped at Horsham developments and it got rid of it, my battery was unplugged for a few days having some welding done, and it came back, Horsham flashed the mapping and got rid of it again, at another £250 😭 

does this procedure still work even with a new mapping on the ecu? 
im terrified to unplug my battery 😂 

Price drop 

Got these from this forum from zmanalex brand new and they still are brand new never used. Was going to put them on my car but then my engine blow up and needed a whole new engine and now no longer need them.

£200 collected .. I live in Ashford but can also get them to the Dartford area or centre of London as I work in both locations

Any in stock at the moment mate? (HR)

Im going to do do the NC 500 soon and I’m wanting to replace some bushes as I have some knocking noises and my steering wheel galls to the left all the time (not tracking or camber on the road)

can anyone recommend what bushes to replace to help with steering and drive quality as I’m clueless with bushes and what brand 

Sold

350z jap speed K4 system for sale 

Flexis have been scraped but work fine and pass an MOT see pictures 

Fits HR or DE

£300 ONO 

Located in Kent da3 

Buyer collects

Still for sale? 

Still for sale? 

With this corona @*!# going on is this still going ahead? Eveything else seems to have been closed 

1. Cs2000 (OO04 MYZ)

2. Paul K  (K50 PTK)

3. MattRwebB (OY57VJP) 

1. andy James PAID

2. Sebastian PAID - Track 12.40

3. Stephanie 

4. Andy_Muxlow PAID

5. SHEZZA PAID

6. Silverthorn PAID

7. Cs2000 PAID - Track 14:40

8. nissmoandy  PAID

9. Paul K - PAID

10. V1H PAID

11. Matthew Thain PAID
12. Jamie Thain PAID

13. whitevanman. PAID
14. Mark350Z. PAID - Track 14.40

15. luigi350z PAID

16. Sarah PAID

17. zzincubus (Len Meakin) PAID

18. Flashback - PAID

19. FruitPolo PAID

20. BUSTER   PAID
21. Trott + 1 PAID

22. George (tarmacsportz) -PAID

23. Valy - PAID

25. MattRwebB - will pay end of month 

Who's getting a hotel.. And are we meeting at a hotel or something to convoy in together? 

are the HR face lift ones different to the DE ??

haha march! i might get some money around then so if i haven't found any ill come to you.

Thank you! £330 is a bit too much atm for me, want to see if there are Andy second hand one 1st, do you do a club discount out of interest? As my birthday isn't far away lol 

Need new wheel arch liners (front sections) 

And new under tray 

For a HR face-lift but think they all fit the same?