MiddletoM

i'll have the touring alloys off you mate! i'll PM you

ah wow, i thought it would be much more difficult to source than this!

PM incomming.

In need of the passenger side carpet after spilling milk on mine.

I know its all one piece and will pay for the whole lot if necessary but i am happy for the two halves to be cut in the centre so just the passenger side can be sent.

Im near Hitchin and so can pick up if local, may be able to swing by other places if im working near by.

Obviously i would like a carpet in good condition with minimum wear and no smells.

Thanks

Tom

On ‎27‎/‎06‎/‎2017 at 10:00 AM, Tarmac@TarmacSportz said:

 

Hmm, honest answer is I don't know, my thoughts are it will be tricky and won't look too good, the filler will be solid but the bumper is flexible so any movements will probably crack it

You could reinforce the back of the badge area with a metal plate epoxy'd in place.

Megadrive for me too.

Been doing some research, the Viofo A119S looks pretty good and has received quite a few good reviews. priced around £85 I think that's pretty reasonable. Techmoan did a good review of it and has rated it his overall best dash cam. I will get it at on payday I think. Oh yea, does have GPS too which could be useful.

a year on and I still look back at my car when I park up.

Haven't actually checked yet. I will wing by there tomorrow, I fear its going to be close to 100 based on my internet searching. I've cleaned mine today and swapped a coilpack so hopefully that cures the p0300 but if it remains I'll still be on the hunt for a maf.

Where can I get a brand new genuine one? ive seen they can range from £30 to £200!

As per title, in the ongoing quest to solve my P0300 I am going to swap the MAF.

Does anyone have a low mileage working MAF for a DE for sale and willing to post? Can collect if near Bedford/Hitchin.

Thanks

Tom

Unfortunately Alex only has HR cats. So still on the hunt.

That's a price I would be happy with to be honest! i'll message alex and see what he says. thanks!

That is quite the journey. i'll see if there are any closer first but thanks a lot for the offer! I have no idea what they go for really but know I don't want to spend £400+ on a new HFC.

I know the cats are knackered because I saw the insides were loose when I fitted my miltek so this was inevitable.

Hi,

After either standard or high flow cats as close to Bedford as possible.

Mine are knackered and suspect they are the cause of the P0300 code and rough idle.

Cats don't have to be mint, just need to work and be as cheap as possible.

Thanks

Tom

Good shout! think i'll order some despite having done an oil change last week.

definitely get a clay mitt. saves a ridiculous amount of time and is way easier to use.

also worth noting that if you do clean the MAF you will need a security torx bit. Basically a normal torx bit with a hollow centre. I bought mine for 4 quid online and cleaned my MAF a couple of days ago using electrical contact cleaner.

was just about to post a thread moaning about this. Couldn't even copy and paste from a notepad into the reply. Im at work so cant change to a different browser.

Maybe temporarily put the dashcam in the front bumper so it can see out between the lower vents. they would never check there. but to be honest I simply wouldn't take my car to a garage I didn't trust.

Would you do the 3 x gear box oils and 2 x diff oils for £55 posted?

what size are the vredesteins?

I always declare every single mod, I even mention stickers. You might as well not be insured if you don't declare everything.

nice! would go with my numberplate M666 ***

Needs lowering a tad

 

Pete

my thoughts exactly! im not a fan or porsche but this one is truly horrendous.

caught this yesterday, got the g3 clay mitt, a sheepwool mitt and some farecla detailer for just over 21 quid iirc.