craigbev92

R&D spark plug kit ordered and received the next day, cracking service... now to attempt the job!

can I take it?

any kits left?

Might be a little bit late in joining in the 'yard sale' a few things I need for the zed are a roof lining, boot dampers, and a few clips to fix my boot lining properly if you have any laying around.

cheers

I'm not far from either driftworks or mishimoto in all fairness so hoping it can be easy to arrange something

Yeah bought from driftworks just really need to be able to exchange it on the day tomorrow!

Title says it all, ordered mishi fans and rad to replace my recently broken ones, delivered today and the radiator was bent! it also didn't fit at the top but did at the bottom.

it was out by about 1cm to 2cm on the A/C rad and top holes.

didn't know if anyone had any experience of this or whether the bend is the cause.

Here is a picture....

I think abbey motorsport sell individual fans, I'm not sure if anyone else does though. The thing is, they're quite prone to the motor packing up, so it might just be worth replacing both fans at the same time whilst you have everything out

yeah I had to do the motors when I bought the darn thing!

I have loads of fans in the garage if you need one?

Tried to PM you but you cannot receive any new one! do you have any 'B' fans?

okay so the fan shroud itself is okay however the propeller itself needs replacing. radiator is a small hole so new rad is the way to go!

Hi guys and gals, in need of assistance!

Bumped the bottom of the Zed earlier today and although there is no visible damage to the underside etc. my fan has decided to spin its way through my radiator!

its squirting out coolant but not at a waterfall pace near the bottom of the rad and the fan is no longer attached to the motor properly. going to take this off and investigate now but was wondering what im looking at parts wise/ cost wise.

terrible day!

cheers

Is it easier to fit in an aftermarket amp if I can find one with similar power rating?

Ok so wired in fine and up and running!

Next problem is that the sub keeps cutting out and turning on when it feels like it!

What can I put this down to?

Craig

Okay so between the pac unit and the HU or between the pac and the cars iso?

I've only ever done plug and play I'm afraid :wacko:

Have you grounded it with a separate wire to the chassis?

I haven't no. How would I go about this? Splicing into the the ground wire on the HU harness?

Hi guys, I've searched for this sort of thing yet couldn't find anything that was conclusive....

Recently removed my stereo to find that the previous owner had mucked up all the wires etc.

This is a bose system and I was only changing the HU.

So I sorted that and was ready to wire in my PAC ROEM-NIS2 to the new HU plug. The only wires not connected to my HU are the low levels and power antenna.

Now I've plugged the m40 and m41 plugs into the corresponding PAC iso's but still nothing.

I didn't know whether the plug underneath the 2 plugs was needed in anyway

At advice would be great guys

Craig

just a quick update... after running through all of the electronics the next thing to check was the fan motors. removed and cleaned and... voila! problem solved! thank you for all of your help fellas!

craig

Go on then.. if theres another one going ill take one please

Craig

Cooling Fan/ a/c fan relays?

Okay so afrer toying about with it all we checked the relays. This has made the air con work! So decided my first port of call would be to change them all as one of them smelt burnt.

Can't find them anywhere however!! Is anybody aware of any zed breakers?

Craig

Okay so the error code was p1217 and the one fan engages with the air con. So thermostat fan or rad switch? Booked in to find out what

 

It will be the fan motor.

 

Alex.

And what are we suggesting for the fix then guys? The new fan shroud from tarmac?

Craig

Okay so the error code was p1217 and the one fan engages with the air con. So thermostat fan or rad switch? Booked in to find out what

One that works, usually.

 

JDM or UK car?

Uk car 53 plate

Nissan will probably charge you circa £50.00. for the privilege.

 

Buy a code reader for half that price as you will require it in the future.

 

There is a pedal dance procedure to read the code, however best get your self a code reader.

 

Alex.

Do you know the best one to buy?

Craig

Will nissan plug it in for free? Although I doubt it lol