-
Posts
56 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by JakeeyB
-
-
This turned up the other day...
Sent directly from Buster at the zed shed :D
Here's what it is..
I couldn't be happier with it
I also took the car into the garage for them to fit my tein springs in purchased!
Can't really tell from the photo but will get some more at a later date
does need a clean though
Also added a stubby
- 1
-
Cheers guys! Turns out one of the clips at the top was caught on the foam wrapped around the pod wires which made it difficult to pull away! But nothing is damaged thank god
-
Removed all the screws as it says in the guide. Got to the part where it said to 'gently pull towards you' but it won't move.. am i missing something here?
-
I'll take one please mate
Just drop me PM with details.
-
-
Just a quick update... I decided to remove the boot weight and what an arse it turned out to be
All that work for a tiny little thing like this..
Which turns out didn't work so ended up doing the penny trick which sorted the boot
I also have a double din unit on the way that will be updated next!
Still haven't got round to getting myself a stubby..
-
-
Thanks for advice guys much appreciated!
-
Looking to buy some decats and noticed some non silenced japspeed decats have come up for sale on ebay. Is there a major difference between silenced and non silenced other than noise obviously?
Also are japspeed decats any good? Or would you recommend spending a little more money?
-
Contact cougar store, helped me out with an aftermarket replacement after mine failed to work.
-
Bought from a fellow member on here as he had to get rid of his zed
I knew somebody would say that it will be done soon!
-
All sorted
-
Damn I just copied and pasted them off photobucket into the bit which says image?
-
Hi All,
Bought my zed June of this year! 54 plate with 49000 miles on the clock in sunset orange and couldn't be more pleased with it
Here's a couple of photos before I started modifying.
First mod I did was 'attempt' to wrap the bottom of the centre console
Will change at some point but for now it shall do
I then took it to my garage for a full service and to replace my rear boot struts as they'd gone!
They said the rear tyres needed replacing and also the joint between the backbox and centre pipe was corroding
So in came the new alloys and exhaust system
The exhaust needs bringing down a touch on the left side but other than that I couldn't be happier!
That's all for now folks
- 2
-
PM'd
- 1
-
Unfortunately broke down yesterday whilst stuck in traffic AA guy said it was the fans not kicking in when needed and upon further inspection by my local garage they say I need 2 new fan motors which from Nissan will cost me around £370 each! Does anybody have any advice on this or had this issue before?
-
Anybody had any experience with this exhaust? I've been offered one but haven't heard much about them on this forum.
-
Teins for a 350z!
-
-
Tyres were never an issue I can replace them that's not a problem.
As you can tell I'm a bit of a novice at this haha!
I'm just looking at alloys to put my own touch on the car and I'm struggling.
-
http://www.ebay.co.uk/itm/321464820872?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
Found a set of alloys on ebay just wanted some opinions and as to whether they'll fit my zed or not!
Cheers
-
Saw this a day ago and was tempted by it as I have an orange zed!
-
Personal preference. I wanted a manual with leather interior.
Worn interior stands out to me and seems fairly cheap for a Z.
-
I'm pretty sure that car has been advertised for a while now.
I bought my 350z a couple of months ago and remember flicking through this one whilst browsing!
- 1
Jakeeys Zed!
in Member Build Projects
Posted
It will be cherished don't worry
Thinking maybe a chargespeed rear and side skirts to go with it..