Jump to content

m1ke13

Members
  • Posts

    71
  • Joined

  • Last visited

Posts posted by m1ke13

  1. Brilliant results, I got into machine polishing on an St205, I'll have to see if I can dig out some photos. I think that's best best results I've seen on a red gt4, good work!

  2. I after any recommendations of what to try next.

     

    I've had my diff mounts changed to pollybushes and now I'm getting a ticking noise when slowing down to stop, you can only hear it at slow speeds and not when accelerating. It sounds like someone is holding a playing card in spokes and is rotational with the wheels.

     

    I've tried the axle greasing solution (great write up by the way) and its still the same. I've also looked at the break pads and they seem as normal.

     

    Any ideas what to try next?

     

    Mike

  3. Thanks 14N, yes they are wider then the standard setup, if I remember right the rears are 285 ill check tonight though. I asked in another thread about sizes and Aliveboy give me the following information:

     

    The PCD for them is 5x114 (5x114.3 if you're being fussy) obviously they're 20's

  4. These were on my car when I brought it back in December and I have returned it to standard with the rays so they are up for sale.

     

    They fit on the car with no spacers or rolling needed and really do fill the arches as you can see from the pictures on the car below.

     

    There in good condition but not perfect because there are some curbing marks, ive tried to photograph all of the scratches to give a true representation of them.

     

    The tyres on them have loads of tread left, ive taken pictures with a depth gauge in them to show just how good they are, as you can see the fronts have just over 7mm and the rears have just under 6mm.

     

    Sorry for being so pic heavy!

     

    Im looking for £600 collected or buyer to arrange a courier, collection preferred due to the size and weight.

     

    Wheels are located in Dudley, West Midlands.

     

    20140412_154336_zpsqpvwqege.jpg

     

    20140510_141540_zps5imhdi0d.jpg

     

    _RCH9588_zpsxfxvyynm.jpg

     

    _RCH9587_zpstax92fsk.jpg

     

    _RCH9586_zpssgednick.jpg

     

    _RCH9580_zpssd3zegwm.jpg

     

    _RCH9584_zpsgxmh4x6p.jpg

     

    _RCH9579_zpsnvcjuc2k.jpg

     

    _RCH9581_zpsvt0a7prc.jpg

     

    _RCH9583_zpse9qzfiby.jpg

     

    DSC_0603_zps1raw4axu.jpg

     

    DSC_0605_zps8ij2ce0p.jpg

     

    And finally a few on the car:

     

    _RCH9543-Edit-Edit_zpsqc3xvovf.jpg

     

    HDR%20Tesco%20with%20lights%202_zps7itqiity.jpg

    • Like 1
  5. Im putting standard wheels back on my car and the aftermarket nuts ive got dont fit so im after a set of standard wheel nuts if anyone has got some??

     

    Thanks

     

    Mike

  6. Thanks again guys, I can't say I've ever heard of xraying tyres before selling them??

     

    They have got some curbing marks on a few of them so im not expecting top money, I was just looking for an indication of what to put them up for. Looks like I need to get them off the car and give them a good clean.

     

    Can anyone help with the sizes for them - sorry im a noob to aftermarket wheels?

×
×
  • Create New...