Fraser@ART

Colour chart added to first post.

They are very nice!

 

Dare I ask £????

 

Aiming around the £1550 mark.

 

What size of discs are they coming with?

 

No plans on making a rear 4 pot to match?

 

That kit is a 357mm kit and yes we do a 4 or 6 piston kit for the rear as well.

 

Is the rear 4 pot the same price?

 

If I had the money you'd have an order right now for orange all round, they're awesome!

The rear 4 pot is slightly cheaper however we prefer that you would install the medium 6 piston kit to balance brake bias without the need to install a brake bias valve then trying to balance it.

I'm running 19's and wouldn't want spacers, do you have dimensions? Although I suspect they maybe too big for the limited clearance I have with the Brembos. They do look the dogs

 

19's you should be fine. Yeah 280x82x138mm for the caliper. Can you give me the inner diameter for your wheel, as in the space in side your wheel for me?

Will do, got one at the refurbishers now, when it comes back I'll measure it and let you know

Cheers mate

I'm running 19's and wouldn't want spacers, do you have dimensions? Although I suspect they maybe too big for the limited clearance I have with the Brembos. They do look the dogs

19's you should be fine. Yeah 280x82x138mm for the caliper. Can you give me the inner diameter for your wheel, as in the space in side your wheel for me?

Look superb, may have missed it but will these fit with standard wheels (17's, 18's, 18" Rays etc)?

17's - More chance of Santa hand delivering you gifts at Christmas

18's - Yes but may need a spacer

RAYS - Again yes but may need a small spacer

They are a thing of beauty.

Thank you Kev. We think that too

They are very nice!

 

Dare I ask £????

Aiming around the £1550 mark.

What size of discs are they coming with?

 

No plans on making a rear 4 pot to match?

That kit is a 357mm kit and yes we do a 4 or 6 piston kit for the rear as well.

to you too

So much want! Wonder if you could put front brembos on the rear and get a set of these for the front in brembo gold?

We can do this set for the front AND a slightly smaller 6 piston set for the rear, anodised or paint gold for you.

Looking very tidy

Thank you sir

Hey everyone,

We have just developed a 6 Piston Kit for the 350z and 370z among others.

Front Kits Come with:

ART 357mm Rotors

ART Bells (Anodised to a colour of your choice)

ART Large 6 Piston Calipers (Anodised to a colour of your choice)

ART Stainless Steel Braided Lines with Stainless Steel Fixings

ART Caliper Carriers

EBC Yellow Stuff Pads (Road Applications) / EBC Blue Stuff (Track Applications)

Gulf Racing 1000 Brake Fluid (2 bottles)

All required bolts and washers including loctite

Rear Kits come with:

ART 330mm Rotors

ART Bells (Anodised to a colour of your choice)

ART Medium 6 Piston Calipers (Anodised to a colour of your choice)

ART Stainless Steel Braided Lines with Stainless Steel Fixings

ART Caliper Carriers

ART Patented Handbrake Retaining Device

EBC Yellow Stuff Pads (Road Applications) / EBC Blue Stuff (Track Applications)

Gulf Racing 1000 Brake Fluid (2 bottles)

All required bolts and washers including loctite

These kits are not off the shelf and are made to order thus allowing you guys and girls to pick either 15 anodised calipers or for a little extra we can offer 16 painted colours with your choice for the logo colour as well. Rotors can also be just grooved or like the pictures below grooved and recess drilled.

We are also shooting for the "Made in Britain" as they are predominantly constructed right here in the UK.

If you are interested or have any comments just post below.

Brake Specification:

Body: Aluminum 6061 T6 (Hard Anodised or Painted)

Piston: Aluminum 6061 T6 or Stainless steel304 (Hard Anodised for Aluminium/Surface Grinding for Stainless)

Bleeder screw: Stainless steel 304

O-rings (Oil Seals+Dust Seals): Ultra High Temp Rubber

Rotor ring: Material Iron EN-GJL-300

Rotor hat: Aluminum 6061 T6 (Hard Anodised/Anodised)

Rear Rotor drum ring: Iron SS41

Brackets : Iron SS41 with Black Hard Anodising/Powder Coating

Hey everyone.

Its been a while since I have been on here since selling my 350z a few years back and things seem to have changed for the better, the forum is looking swish!

I used to be under a different handle which I couldn't remember for love nor money so established a new one as it's considerably more related.

Since not being on here I've been a busy boy I'm about to launch a new brand of parts which I have been working on, ART. I'll drop a thread in the general section soon but until then here is a picture of our 6 piston caliper for you to enjoy

Cheers

Fraser