350zlew

Nice haha mine may possibly be a tad better as im only going for 400bhp maximum but sounds like a blast haha! My standard z is lethal in the rain as it is haha bet yours is mental!

Awesome!! Bet thats one quick motor! Lively rear end i should imagine? Lol! What charger you use mate?

Haha thanks mate pretty juicy then! How many horses you making? :-)

Just wondered what mpg you guys with supercharged 350z are getting? Not that bothered if it goes down tbh as if i wanted an economical car i would have brought a micra!! But am just curious as to what i would get mpg wise at about 400bhp :-)

Sorry its come out sideways haha my bad!

Right the test report that came with the injectors is attached to this post... these figures dont mean much to me so i just wondered how they stack up against those who have already got uprated injectors? And would it be worth getting them tested again in the uk to be sure?

Thanks optet they look pretty decent... :-) What charger did u opt for?

Okay buddy not to worry ill check the flow sheet.... they also say high impedence but im not sure if theres different severitys of that :-) best get them tested i think :-)

Whoa sorry for the overload i didnt think it was posting... hmm so do these look far off from what yours are? :-)

Condition: Reman Comes with Flow Sheet Flow Rate in CC per minute: 660CC/min @ 43.5 PSI or 3 BAR Resistance: 15.1 ohms Voltage: 8-15 Volts, nominal 13.5 Volts Amperage: 1.0 Amps Pressure: Min 30PSIG/ Max 100PSIG O-rings Included: YES Warranty: 1 Year Warranty

Any of these figures mean anything to you guys? This is the injector info.... bearing in mind ths power im looking for :-)

Condition: Reman Comes with Flow Sheet Flow Rate in CC per minute: 660CC/min @ 43.5 PSI or 3 BAR Resistance: 15.1 ohms Voltage: 8-15 Volts, nominal 13.5 Volts Amperage: 1.0 Amps Pressure: Min 30PSIG/ Max 100PSIG O-rings Included: YES Warranty: 1 Year Warranty

Comes with Flow Sheet Flow Rate in CC per minute: 660CC/min @ 43.5 PSI or 3 BAR Resistance: 15.1 ohms Voltage: 8-15 Volts, nominal 13.5 Volts Amperage: 1.0 Amps Pressure: Min 30PSIG/ Max 100PSIG Warranty: 1 Year Warranty! This is what was posted with the injector ad... do these mean anything to any of you guys? Bearing in mind the power output im looking for :-) Obviously the warranty doesnt stand for @*!# haha

Thanks alot mate im based in essex so ive just found a injector testing place near to me in basildon so ill definatly get that done first... appreciate that so if theres any problems with them ill be sure to contact you.. Do you have a business number you could pm me so i can give u a call for some injectors if these dont work? Cheers

Haha it is buddy... its more of a project tbh :-) Whats happening is we are getting the top half of the inlet manifold remade out of billett aliminum to fit the charger on top... so once done it should all just bolt on top :-) Performance wise alot of guys recon it can easily make 400bhp with the right pulley and uprated fuel system... gonna take some figuring out but ill keep posting progress pictures and any problems we come across! Bit of a learning curve hahaha! :-D