Jump to content

themoffshop

Members
  • Posts

    41
  • Joined

  • Last visited

Posts posted by themoffshop

  1. Here is the Dyno run from Abbey Motorsport the other day.

     

    BHP figure is on the right middle (618 at the hubs)

     

    Lb/ft is on the left middle (divided by Diff Ratio which is 4.111:1, giving about 475 lb/ft)

     

    Its maxing out the injectors, so has been set back a little form this run

     

     

    Weather is looking like it might be dry, I can't wait for this Sunday !!!

    • Like 1
  2. Hiya All,

     

    Sorry for a delay in updating....

     

    The car is now back with Abbey Motorsport for a little bit of work.

     

    Dyno Run - Bit of a health check to make sure car is performing ok

    Suspension alignment - Abbey have a new hunter 4 wheel alignment and geometry set up tool which was recently installed.

    Service - Change all the fluids....

     

    Few other bits... :)

     

    Keep you posted...

    • Like 1
  3. Updated Spec List smile.png

     

    Engine

     

    RB26 Red painted engine (from an R32 GTR)

    Garret 4094R Turbo (Oil and Water Cooled)

    HKS F Con Pro Gold Ecu (version 3.2)

    Wossner Pistons

    PEC Rods

    ACL Race Bearings

    Stage 1 Abbey Motorsport modified Head

    HKS Camshaft 264 Duration - 10.0mm Lift - Inlet

    HKS Camshafts 272 Duration -10.2mm Lift - Exhaust.

    Balanced Crank, flywheel, front pulley

    Top Mount Manifold

    Denso 720cc injectors

    HKS Oil pump

    N1 Water Pump

    HKS Gaskets and seals

    HKS Triple plate clutch

    Greddy External wastegate

    Trust 100mm FMIC

    Mocal 34 Row Oil Cooler

    50mm Japspeed Radiator

    Nismo Fuel Pump

    Splitfire Coil Packs

    Rips modified GTR sump, with diff removed, welded, extended and baffled

    Cold start system removed

    Cabin heating systems removed from engine

    Greddy Fuel Rail

    R34 GTR Engine Loom

    Greddy EGT Gauge

    Greddy Profec B Boost controller

    HKS Hard Pipe Kit

    K&N Super Huge 100mm intake Filter

    Air Con Removed

    Carbon Canistor Removed

    RB25DET Gearbox

    Vibratechnics Custom Race Engine Mounts

    Exhaust

     

    Japspeed Silenced De-Cat

    V-Band 80mm Turbo Elbow & Downpipe

    Japspeed spec 1 cat back exhaust

    Drivetrain

     

    Heavy Shockproof Gear Oil

    Silkolene Diff Oil

    Nismo Pro S 1.5 Way Rear Diff with extended cooling fins

    HKS Triple plate Clutch

    Suspension

     

    Cusco Front Strut Brace

    Cusco Rear Strut Brace

    Driftworks Rear Camber and Caster Arms

    Cusco Front Camber Arms

    Polished Stainless Hicas Lock Bar

    Driftworks Front Tie Rods

    Tein Track Rod Ends

    Tein Track Rods

    Poly Subframe Bushes

    Driftworks Rear Traction Arms

    Ohlin Coilovers (Rebuilt to full track spec)

    Exterior

     

    Full Respray (coming soon)

    Nismo Bodykit

    Custom front Splitter

    Carbon Nismo 'B' Pillars

    Custom made Carbon Kevlar bonnet

    Custom Carbon Kevlar wider front wings

    Carbon Rear Boot

    Carbon Rear adjustable Spolier

    Custom Sand Blasted, etched and powder Coated front and rear subframes

    Dual HID's 600k 55w. Main and Dipped Beam

    Interior

     

    Tinted Windows

    Corbeau Evolution Carbon Kevlar Drivers Seat

    Sparco Formula D Suede Steering Wheel

    Snap off Steering boss kit

    Extended steering boss

    Apexi Dual Turbo timer

    Greddy Profec B2 Boost Controller

    Stripped Interior

    HKS Boost Guage

    2 x 3" 4 Point EJS Racing Harnesses

    Andy Robinson FIA Approved 7 point Roll Cage with Door Bars

    Greddy 60mm EGT Gauge

    Greddy 60mm Oil temp Guage

    Greddy 60mm Oil pressure Guage

    Stack Water Temp Gauge

    Carbon Door Cards

    Brakes

    Nismo Steel Brake lines

    Stoptech 355mm Front and Rear Discs with Aluminium Hubs

    Stoptech 6 Pot Front Calipers

    Stoptech 4 Pot Rear Calipers

    DS3000 Pads

    Custom Moff made brake stopper

    RBF600 Racing Brake Fluid

    Wheels & Tyres

     

    18 x 11J Rota MXR Rear ET+8

    18 x 10J Rota MXR Front ET+12

    Toyo 888's 265/30/18 Rear

    Toyo 888's 265/35/18 Fronts

    Power

    At 1.4 Bar Turbo Boost pressure

    Peak Power 605 BHP @ 7816 Revs @ Hubs

    Peak Torque 445 lb/ft @ 6310 Revs @ Hubs

  4. Well, what a day...

     

    We managed to end up in 3rd position in the final, and were also faster than the previous club record set in 2011... (guy in first place now holds it, as he was first, but just goes to show how quick the final was)

     

    Photos and more details to follow soon... :)

     

    Huge Thanks to Abbey Motorsport for their help...

×
×
  • Create New...