sunshine

I thought calsonic designed/manufactured the exhaust systems for Nissan?

Sounds nice! This gives me an idea. What if I buy silenced pipes, try them, then if I decide I still want more noise just remove the insides? Or is that just stupid?

Ok then so I think we're unanimous on avoiding japspeed!

How much louder? Like annoying loud or nice loud?

Hello it's been a while since i've posted. Basically, I want to make my DE sound more aggressive. Firstly, I chopped the standard airbox and replaced the standard filter with a K&N which created a awesome induction note but completely overpowered the standard exhaust system. So I fitted a Scorpion system (Y-piece back), which although gives a pleasant tone to the exhaust, the difference is only really noticeable outside the car. I find the volume is still to quiet from inside the car for my liking. So the next obvious change to make would be replace the catalytic converters. Now a quick search finds a vast array of silenced and unsilenced pipes. What I want to know is what are peoples experiences with each? Am I going to notice any difference in volume with a silenced decat? Do unsilenced ones sound crap? I should mention its not a daily commuter, more of a weekend toy, and as you've probably gathered i'm not really concerned with performance gains, so long as it sounds good is all I'm after. Thank you

If you have started to drive it more often it's very normal that you get used to the power and it feels alot slower than it actually is. The £500 i spent on a peageot 106 diesel to commute in is the best power upgrade i've bought for the zed.

Hi guys not sure if you've seen in the general section but i've crashed the zed Im after; 1x front nearside lower control arm /or control arm to subframe bush. 1x front nearside compression arm. 1x front rays alloy wheel (any condition as its gettin poweder coated anyway) Thanks

Thanks for the kind words guys. I managed to jack the car up after work and have a closer look; Seems like the subframe has got away with it. Lower control arm bush has seen better days though. The alloy is not actually as bad as I thought and may even be refurbishable, i'm no expert though. Apart from that and the track rod I can't actually see any further damage. Suspension strut looks straight, balljoints seem intact, drop link looks ok. Although i'm sceptical about the compression (banana) arm being possibly bent, but I can't tell. So best case scenario looks like:- 1x nearside lower control arm. 1x nearside trackrod 1x alloy wheel refurbish 1x wheel alignment Going to start stripping it down tomorrow afternoon and fire a few PM's off to Sigh.

I agree i'm very lucky to be fair it could have been much worse. My biggest fear is I could have bent the subframe where the LCA bush bolts through but it looks like it could be okay. I'll jack it up tomorrow and remove the wheel to have a proper look. I'm defiantly looking to find some used parts to repair it with, funds really mean this couldn't of happened at a worse time

I could sit here and write a long story about what happened but i'm guessing most of you will get the idea just by looking at this... 100% my fault, going far to quick into a soaking wet roundabout. Just glad no one else was involved. Can't get the car off the ground to properly look at the damage, but from what I can see it looks like the wheel and lower control arm bush has took most the impact. Track rod looks bent, also possible damage to the banana arm but can't really see. Managed to limp the car home, albeit with some difficulty turning left.. Took a few photo's (crap quality sorry) What sort of cost am I looking at here? dare I ask..

What I want to know is who are these idiots driving the car with the engine knocking and not noticing that something is not quite right untill the engine has completly disintegrated!

Sounds legit.

The thing with the Z is it's got very long legs, if you're not in the right gear at the right time most hot hatches will keep up no problem. Because a 'lesser' car kept up doesn't make the Z slow though. Just think of it like this, there's probably plenty of people on the porsche owners forum saying they can't belive a 350z kept up.

It's a common issue, to be honest mine could do with a oil swap and i put castrol stuff in last and its Sh1t.

Oi im a 22 year old lad and I'm responsible enough to never ever ever ever admit to loosing to a ST

Perhaps the snow was pilled up above the railing then melted?

Spotted a nice azure blue coupe with a nizmo kit and private reg heading towards leek. I was in the gunmetal 54 plate flashed you

This may seem a little daft but i don't think i'd want to sell my pride and joy on a forum like drift works. 'Take care of her,' and all that...

Coilpack arrived today from R35LEE. Fitted and the problems completly gone Cheers

Done some reading on these and want to give one a whirl. Any condition so long as its working is fine Cheers

Alright guys swapped the coil pack from cylinder 3 to cylinder 5 today and the code changed from p0303 to p305 so its definitely the coil pack causing the misfire.

Thats a good idea, i'll try that first. Cheers buddy if it is indeed the coil pack i'll be in touch.

My car's got gremlins under the bonnet. It seems to have developed an intermittent fault where it misfires under load. It drives fine under light acceleration however when i put my foot all the way down there's loads of vibration and the car feels like its lost 100bhp. idle also seems erratic and there's a strong smell of petrol when cold. The cel light starts flashing sometimes, ive done a pedal dance and found the code 303 pops up, 'cylinder 3 misfire' My initial thoughts are the ignition coil could be on its way out, are these replaced individually and the same for each cylinder? how much do they cost? I say it intermittent because sometimes it's absolutely fine then sometimes its like crap. need to get it sorted because im doing a 600 mile round journey in a few weeks. cheers chaps.

If it has two intakes its 313bhp, if its one intake 7,000rpm redline its 296bhp, if its one intake and 6500 redline its 276bhp.

Very common place for corrosion, if its anything like mine was your gonna have one hell of a time trying to weld it up. Perfect excuse for a new system if you ask me, if you like the noise now i'd reccomend the scorpion system. I've just put one on mine and the sound is awesome and the quality is top notch for the price.