zxalex

9 minutes ago, ShortPaul said:

I hope the first pic is the most recent 🤣looks good congratulations 👏

Yes it sure is lol. Thought the crashed one was salvageable 😂🤣..ended up getting another good bodied one with broken engine and put in good 50000 mile engine out of crashed one ... if that makes sense 🤪😁

Thank you.

38 minutes ago, Andy_Muxlow said:

Nice.

Thanks

56 minutes ago, pintopete58 said:

Looks a top job gaps are good 

Thanks lol. Just used the engine from the crashed one 

Finally after 11 years I have my 350z project complete!

No longer a 350z hopeful now lol. Here are a few pics pics

Any body know what wires here are for that have been cut? First 2 pics.

Also the loose wires that have been cut/paired?  3rd  pic

Could be a possibility thanks. Only other thing I can think of is an electric passenger seat

Can anyone tell what is missing from the large clips under carpet passenger side down side of the seat near the door. Could it be for wiring if so any ideas also a pic of what should be there?  Sorry not great pic as taken in a hurry.

Thank you.

Any mechanics on here from north east of Scotland on here from Lossiemouth/Elgin area work on 350zs? or anyone know of. Thanks. 

The information is there thats from the 240mm original clutch. It's okay as there is no one that knows everything. I can assure you the garage I have my car in knows his stuff and can do his job competently. Thanks for the advice you could give. 

2 hours ago, ZMANALEX said:

I have seen some DE motors with the 240, however, it can be an easy and inexpensive fix, but the OP, unfortunately, is not listening or providing the information requested  I am afraid.

I'm sorry you think this ZMANALEX. I am listening and have taken on board all advice. Information about clutch supplied is the only thing I haven't got  as it was delivered straight to the garage that is doing the work. I/we know how  to get round it but again as stipulated previously was originally wanting to change like for like with the original 240mm nissan clutch but this is not an option. Looks like there is no clear reason as to why it came like this  because there is no clear answer. 

2 hours ago, Kryptek49 said:

If the car is a DE/RevUp,why would it have a 240mm clutch in it - is that not HR only? 

That was a thought I had too. 

1 hour ago, Andy_Muxlow said:

It's either a de or de rev-up then at a guess. 

Thanks

11 hours ago, Kryptek49 said:

Is your car an HR, and you've bough a clutch for the DE? 

That was a thought.  Year of my car is 2006. Thank you 

35 minutes ago, ZMANALEX said:

What he has said ^^^^

 

However, you will probably ignore this nugget as well.

 

This is what you should have bought:

 

 

 

 

Thank you. My apologies for asking advice... and seeming thick. Will probably go for a solid flywheel to go with kit bought. Originally wanted to put in like for like. 

3 hours ago, kbeast35 said:

I’m confused, you’re asking for help/advice yet seem to be ignoring the help/advice on offer

Sorry if you think this is the case. I certainly am not ignoring it. I'm very grateful for all the advice given and am looking into everything although  my replies are up in the air so to speak. Why such a comment? Am I wasting your time? 

Seen this. I wonder if compatable

This is the clutch that came out. It doesn't mate up with the flywheel. Other option is to get a new flywheel. It's a 55 plate 2006. Engine that went in it is listing same clutch. 

Sorry its a bit vague. Mechanic said it's a@240mm clutch that's in. Found this on the web

The exedy one 

Exedy

Mechanic went to fit clutch on my 350z today and it wouldn't fit. It's 250mm @ 10mm bigger than one that came out. Any advice/help appreciated. 

The wheel is cracked no use. 

Strange why there is 2 pcds

How do you take the crankshaft Bush out of engine for gearbox? Changing an engine that came from an auto and putting into a manual. Can Bush be used again? Can you buy one new by itself?  Thank you. 

Can anyone tell me why there is pcd 5x114.3 and 5x120 on the wheel