simon da silva

Can't belive this, nobody is going a FI build during the winther and need these items?

Hey Keysar.

If my new wheels wont clear my BBK i will take these. Wheels are coming to my place in 1-2 weeks

I would love to compete with my Danish Supercharged Nissan 350z. A few of you might allready know it.

Engine:

3,5L V6

4 Valves pr. cylinder - 24 Valve in total

3.498 cm3

363 Nm Torque, at 4.800rpm

Max RPM: 6.200 pr. min.

0-100: 5,9 sek

Limited to 250 km/t

Engine Bay:

- Ati Procharger Supercharger kit

- 11PSI Pulley Kit

- Bosch EV14 550c Injectors

- Walbro 255 Inline Fuel pump

- Rare JDM Engine Harness Cover

- Custom Bolt n Washer Kit

- Black Hood Dampers

- Painted Intake Manifold

- Weapon's R, Cooling and Servo Tank

- ARC Oil Catch Tank

- Battery Opgraded to Yellow Top

- AMS Lightened Pulley KIT

- Nismo CopperMix Single Plated Clutch Kit

- Lightened Flywheel Kit balanced to Clutch

- Motordyne 5/16 Plenum Spacer

- Engine Bay has been painted!

Horsies:

From Factory 287HK

Current HK Estimated around 400whp ( 450 Crank )

Wheels:

Volk GT-C Light Weight Racing Wheels

- FRONT (19x9.5)+21(5x114)

- REAR (19x10.5)+8(5x114) ( 15mm Spacers )

Tires:

Front: Bridgestone Potenza RE50A 235/35/19

Back: Bridgestone Potenza RE50A 255/35/19

Suspension:

Stance n looks Gear.

- Currently: XYZ Super Street True Front / rear Coilover

- First in Denmark Aircup Lift kit for Front suspension ( lift about 7-10cm )

- SPC Front Wishbone Full front camber adjustment

- SPC Rear Camber Arm, plus Toe Kit

- K-sport Black 8 pot front Caliper with 356mm rotors

- K-sport Sport Pads

- Stainless Steel Brake lines

- K-sport Black 6 pot Rear Caliper with 330mm rotors

- K-sport sport pads

ICE:

Stereo Setup:

Pioneer DEX-P99RS Headunit 4 Way Aktive DSP

Scan-Speak Illuminator Tweeters

Seas Lotus 6,5" Mid bass

2x B2-Audio Ref10 10" 600w Subwoofers

2x Pioneer PRS-A900 4 Channel Amplifier

Pioneer SPL-D2000 1 Channel Amplifier

Ground Zero GZ2500.00 Gel Battery

Styling:

Exterior:

- Custom Painted the entire car in black with silver flakes ( car has done 300km after being painted )

- 370z Sidemarkers installed in front fender instead of the Z emblem. ( only car in EU with this mod )

- Custom rear blinkers and reverse light ( one of a kind )

- Custom 06+ Front lights with stealth Halo, and Deamon eye, plus painted matt black ( One of a kind )

- Front bumper replaced with a Nismo V1, with customer Black Reflex

- Rear 06+ LED Tail Lights

- HKS True Dual 2,5" Stainless Exhaust installed with TItanium burned tips

- Megan Racing Resonated Test pipes

- The true beauty of the 350z itself

Interior:

Interior:

- Entire interior has been rebuild for EMMA SQ use in DK, and on European usage.

- Entire car has been Sound insulated with B2 Mats

- Custom A-Pillars to fit Tweeter

- Customer Door Pads build to fit kick bass in a more optimal position

- Custom Subwoofer case Underneeth Rear Strut

- Extra battery installed behind drivers seat to ensure power for the stereo at all time

- Entire Trunk has been rebuild to fit 3 Amplifiers. It's a stealth build so you dont notice the build at first glance

Extras:

Retractable front Licens Plate

Here are some pictures.

What are the seat rails currently made for? Would like to know the messurements for them

Nobody doing a FI build this winther and needs some awesome gear to do it?

Motordyne plenum spacer is sold!!!

Hello Lads n Gals.

Im parting out the last pieces of my supercharger build as i rather wanna have a customer leather interior and i cannot affort both.

Parts are almost brand new exect injectors witch i bought used. They have been flow testet and are in perfect working order.

I used the injectors, upref maf, Tuner software and spacer for about 2000km +/-

Uprev Software Tuner.

Price is £450 / you save 85 compared to retail prices are Abbey

Hey mate. The exterior apillar plastic and moulding.. that pieces that goes feom the bottom of the widnshield to the back of the roof. If the moulding is in good condition then im interested

SOLD PENDING PAYMENT

replied

my mate wants to buy these 100%.. Calling dips on it, since i know he is out driving alot of hours today

best bid is either zmanalex on this forum or ebay.. there you should find most parts

Hey everybody, i've just dropped the price to £1600 without tires. Need these gone as the replacement is ready and needs to be paid

Tarmac Sportz Side lip kit

its going to be similair to the Turbonetics kit, so its placed around the airfilter box possition. Just gonna run it around 400whp, since the block isent build

its a Greddy TD06 turbo, but im guessing that i would take the feed from the sandwich plate ( pressurised ) and then make the oil return in the sumppan. the turbo is top mounted so gravity will be my friend

Thinking like sanwich plate like this to feed both oilcooler and turbo

http://www.ebay.com/itm/UNIVERSAL-OIL-SENDER-FILTER-SANDWICH-PLATE-COOLER-ADAPTER-KIT-TURBO-BL-/271413516816?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A350Z&hash=item3f31819a10&vxp=mtr

Hey people.

Im thinking about a single turbo build, and i was concidering how to feed the oil to the turbo.

Is it possible To run the oil to the turbo via a sandwich plate, and then use the sandwich plate to take the return back again. Like having an Oil cooler installed, this will just be an Oil heater instead

SOLD MODS PLEASE LOCK!

You can find some in germany aswell, but there is a dealer in holland who imports the 240z from California..

Might be worth a shoot.

Try and google 240z for sale

Aight thx for getting some market prices was it including tires?

PRICEDROP to £2000

Thx guy's for all the thumbs ups!

Taking offers on these wheels! Need them gone so there is room for my new

19 Row x 11,25" SETRAB core

BUMP TO THE TOP! TAKING OFFERS