imhereithink85

won't be able to make this, my wee man is only 7 days old have a good one

I'm gonna leave asking the wife if she won't mind me nipping off for the day closer to the time looks like it will be a good turn out, shame to miss it

probably wont make it along to this, will have a 3 week old baby to look after make sure there is plenty of pics taken

I have had my car on Wallaces dyno three times now and they have been very consistant. This years was almost exactly the same as last year, the graphs overlayed very nicely.

Forgot to ask you when your last service was and which one was it?

No I didnt need it, went on by hand, plus theres no room for it once on the studs

1. Aaronc350z - Ellon Aberdeenshire - Gunmetal

2. imhereithink85 - Bridge of Don Aberdeen - Kuro

Hey guys,

I am selling this M12 x 1.25 pitch Die which has only been used once. I needed it to tidy up the threads on my spacers after i minced a few while taking some stubborn nuts off. Worked a treat, threads are like new. Thought I would let others get some use out of it now as it will just sit and be forgotten about.

Looking for £20 delivered which is cheaper than what i bought it for

so err has anyone else got a parking ticket from the meet? just got one through the door for £60! nightmare

would have been up for a run out today if i wasn't fitting a new sink and toilet . . . the joys

great pics Dan! I may have a copy as my desktop background

it was great to meet you all, was a good day out and a fun drive out to Banchory and back no need for tunes, just had the window down to listen to us all

Oldbones did you head off once we got onto deeside?

Car meets is not one of my wifes strong points

I'll be on my own, which means if the weather is fine we could go for a back road blast?

11am onwards short tails i.e. decat?

ace, thought you would be on here, heard you rev at the junction That is also a very nice sounding exhaust you have, heard you go full chat after I pulled in

Will hopefully catch you at the meet next Sunday

Anyone on here?

Would have given it some more beans but i had my heavily pregnant wife onboard she wouldnt of liked that lol. And we also missed our turning hence the random turning off.

yeah the screw corrode pretty quickly. Plenty of WD40 and a pick will clean it out enough to fit the Torx in

heres a map of where to find it

http://en.parkopedia.co.uk/parking/carpark/harbour/ab11/aberdeen/

Spotted you in the car park today, someone from BP i think. Anyone here?

Forgot to say thanks to CS for great service as always

Hey guys,

Thought I would share my experiance of fitting new Black diamond discs and pads (Brembo fit) to the front.

If you find that one or both of the pads are really stiff to come out and go back in you will probably have some bubbling of the paint on the inside of the caliper where the metal slider sits. Don't think that the pads are the wrong size, im sure I have read that before on here. The paint underneath this is notorious for bubbling which in turn pushes the metal slider out enough to stop new pads going in and the old ones being a bitch to remove.

What to do is remove the slider which is held in by one T27 torx screw. Give it a good clean and file down to remove any and all build up. And also clean up the paint underneath where it sits. You will find that the paint will just flake off very easily with a flat screw driver. Once you are happy that it is all clean refit the slider. The new pads should slip right in with little effort.

Job done

Heres two pics of what the slider looks like and where it is. You can also see that the paint has bubbled and is lifting underneath. Sorry for not having any with it all cleaned up, was too dirty and couldnt be bothered

Welcome along! if you have the time you should come along to the meet early march,we are a friendly bunch

I should be onshore permanently by then so there should be no reason to miss this

I'm currently offshore, but there is a chance I'll get home by the weekend as the job isn't going to plan If i'm home count me in

great write up thanks. Also love the Drive/Clean videos, totally addicted to them! he has a great passion for detailing which comes through

thanks for the roll and coffee Martin Was good to meet new guys (and girl) Fingers crossed for better weather on the 2nd