bakseedaa

Torqen a trader on here sells the full set of hoses in a few different colours 

I think they were just tie wrapped...not 100% sure though

I just relocated them. If I remember correctly they sit just behind the bumper now on the aluminium strut

Mine went about 5 weeks ago. As Zman says don't put a oem one back in they are fatally flawed. I uprated my clutch and flywheel at the same time also.

Hardest thing would be finding it to order unless you pay mega money for shipping?

No I got mine from the local stealership

There is a sticky on it in the 370 general forum 4th pinned one down

I very time I read about a problem I seem to end up with it.... Must stop reading 👀

Yes the CSC is a very common fault on the 370. Just got mine back yesterday after it failed on me after 24000 miles. In the US some are trying to get a major court case ( or something along those lines) going against Nissan for the crap they send out as a CSC. Apparently the Oem CSC is a piece of crap with major flaws .

Just read about the Oil gallery gasket on the pre 2012 370s ... Please for the love of god don't let that be my next problem 😭😭

Glad you got to the bottom of it and it wasn't a major fault

How big a job was it to change the oil gallery gaskets ?

How much did you boys pay for the install if you don't mind me asking. My Csc just failed .im waiting for the new clutch and flywheel to come.

http://www.the370z.com/exterior-interior/95060-2015-nismo-bumper-2009-sport-possible.html.

If you look through this thread there is a list of the required parts. I do have a few of the parts left over from my install...double ordering etc

Yes the rear is a straight fit. Don't know if you will have to get the bracket that the bumper sits on. I had to but I had cut my original one when I had the Amuse bumper on. I got the Nismo arch liners aswell. The front one requires a few more extra bits than the rear

I've not really noticed much difference with them from the 19s.. the handling was still superb the couple of times I took it down to Millbrook. Maybe the ride is a little harder but I didn't really notice

I have 20's on mine

Would I have to buy the whole kit ? I already have the Mishimoto rad hoses in red but would like to do the rest of them

Thats the problem Marco..... They are never finished 😂

Looks great!.....but I thought all French guys bought Renaults?!

Thanks!

It depends the guy

Most of my friends have no Renault but other brands like VW, Audi, ect ...

Most of the cars I see here are coming from Germany

 

very nice

Thanks!

 

Hi again, lovely car buddy and good work done.

Thanks! And it's not finished!

Cheers I had looked on his site but couldn't see them... I'll drop him a message.

The Z is looking great mate. I've got mine on the Umbrella air lift suspension but it's not slammed like yours....I darent

Where did you get the undertray from?

I know that feeling. I have the amuse kit on at the minute but I'm not keen on it. So it's in now having the nismo kit on. But I wasn't sure if I had to buy the accents

Yours looks great painted so I'll go with that thanks

Cars looking mint 😎 .The red stripe on the rear bumper and sides is it a trim or just painted?

Are theses still available Steve?

René, yours is already on the list, I knew you're going to need one I suppose you want the carbon trims with it, right?

Thanks Adrian but i pass on that option. Carbon trim is not needed for me

I shall spend that money on other go-fast-bits. E.g., I still want KW V3 coilovers and Umbrella VRH Cup kit.

I've got the Umbrella VRH cup kit on mine. Had the kit on nearly two years now never had one bit of trouble with it. Great bit of kit í ½í±í ½í±

Dose Paul pack a jet engine

Pmsl

Hopefully later this year I will be doing 🙃