flyhalfandy

Would it be better to go for 9.5 rear and 8.5 front then? Is this possible with a 17 offset? Would profile of tyre would you's recommend guys? Thanks again!

Hi Gaz, Would the car still handle ok with that width and +17 offset wouldnt have the wheel sticking too far out the arch would it? Was thinking of lowering it on tein suspension (14-17mm). Do you know if i would have any rubbing issues? Seen your website and that they come in various different colours, would it be possible for you to post pictures of them? And FINALLY my last question are they on back order and what would delivery time roughly be please? Many Thanks Andy

Was planning on keeping my rays to put back on when winter comes. Does the lip last through summer? guessing it is the salt on the road that rips it apart . Do you have a few pics of them? Ive got a twilight grey zed and was thinking silver as opposed to a gunmetal center... Also what size/width and offset have you got? Thanks Andy

Been looking at a set of Volk Gts wheels in 19 inch and am im correct in saying that roughly a 20mm offset would be ok? PLanning on lowering the car on teins but dont want any rubbing issues (if i can avoid it ). Where would be the best place to get a set as it looks like ill be importing them Sorry if this topic has been covered before guys, any helps appreciated

Adam, its an 07 plate zed and was going to run a set of 19inch volks. is there much difference between the two eibach or tein sets? What would you advise? Feel the back sits a bit hight just now so was really just to close the gap, not too stiff but enough not to be feeling like a bus Cheers Andy For an 07 I'd choose the Tein S Tech Awesome thanks adam!

NO NO i have quite a few subtle mods check my sig. I am from giffnock mate just down from ek. Where are you based? Why dont you get your name down for the big Glasgow Meet on the 31st? Your car was looking well mate I put my foot down as i thought i saw a zed then when i did u where lookin cool with you shades on Anyway get your name down for the meet buddy. The more the merrier. Paul I kno mate so many bloody roundabouts in Ek but it was just before the shopping centre lol and didnt have a clue the name of the roundabout hhaha. Im based in EK so 5 minutes away from giffnock! Yeh read the post and up for the meet, where about is it? Was a few locations mentioned there . Haha rain hail or shine, you gotta have the shades on . Car was looking well smart! Most ive got is a nismo gear knob just now, its all in the pipeline i.e. on order

Yeh sure was mate, just seen you at last min and waved as your gf was being nosey . Where abouts in glasgow you based? Car was looking ! Was it just nismo spoiler you had?

Where are you based mate? I have a custom zorst on my car and i love it. Just a little louder than standard and has a crackin note to it when your playing lol Thanks for the help guys. when does the new 5zigen come out? Based in sunny Glasgow . Who done your custom zorst?

Im looking at an exhaust system for my 07 plate zed but not too sure on what to go for. Im wanting it louder than stock but not "too" loud if you know what i mean. Enough to hear that V6 note but would you recommend having one custom made or buying the like of Nismo etc? Have had custom exhaust on previous cars but not too sure for the zed Cheers Andy

Had nismo spoiler and was an Import. Smart looking car! Anyone from here?

Adam, its an 07 plate zed and was going to run a set of 19inch volks. is there much difference between the two eibach or tein sets? What would you advise? Feel the back sits a bit hight just now so was really just to close the gap, not too stiff but enough not to be feeling like a bus Cheers Andy

Do you have any pics please? Would be good to see the different in height

Im looking at fitting eibach or tein suspension but still have 1 years warranty left on the car. Could this make it void? Thanks fior the help! Andy

Clutch at 9800 miles??!!

Do you have any pic of your car with the tein suspension? Would be good to see a comparison as stew's does look pretty low Here you go mate, the Eibach kit would have been too low for me on the clearance. Mine is on 19's though. Im looking at a set of Volk Gts 19's. Do you reckon the eibach would be too low then?

Do you have any pic of your car with the tein suspension? Would be good to see a comparison as stew's does look pretty low

Im looking getting springs fitted to lower my zed. Not wanting to go too low and fit coilovers but what do yous feel the best kit to go for is between the eibach or tein spring kits? Does anyone have any pictures of each kit? Any help would be appreciated Andy

Popular choice for springs only, £205.00 delivered for members, labelled as 30mm drop front and rear but its closer to about 27/28mm... More than that (on springs only) and I think you'd be running into major difficulties. One thing to note though is that standard wheels look rubbish when the car is lowered. If you aren't planning on changing the wheels it might be an idea to look into spacers too. cue CS stage left to centre with price! Im going to change the wheels too but wanting to do suspension 1st, ive found in the past it looks odd with big wheels and riding like a 4x4 . Is there much difference in quality between 5 zigen and Volk?

Yeh thats the reason I was thinking of this kit, german quality is usually top notch! Im going to get a quote from them today so we will see if the wallet will allow

Hi All! Wanting to lower my Z but not wanting to go as far as coilovers. Had coils on last car and speedbumps, dips in road were my biggest fear if only sat nav could create a route to avoid them . So im thinking of the Tein S Line Kit 30-40mm if im correct? Has anyone fitted suspension themself on a ZED? Easy done or is it one for the garage? Thanks Andy

Yeh i noticed there were a good few things that you can get cheaper else where. Have never seen the LED kit plates or boot strut (if thats what its called ) LED lights which look a nice wee upgrade! Where is the best place to buy parts? Heard of Envy been branded about...

Hi all! Recently bought a Zed in gunmetal grey and been looking at the strosek bodykit. Has anyone ever fitted this before or know anything about it in terms of quality, fitment etc? See link if unsure what im talking about http://www.ctd-germany.com/shops/350z/shop_e/index.php Thanks for you help Andy

Hi All! Soon to be a new and first Zed owner and thought I would say Hi . May aswell get started early on the forum . Where are you all based? Im in Glasgow but noticing a good few folk are from down south. Any fellow Scots or will I be racking up the miles travelling to england and back for meets Andy