Nordic GT

The main parts would be as follows:- The top bulkhead plastics just behind the seats The plastics on the rear strut bar Passenger side boot lid plastics Passenger heated seat switch All the screws that hold in the centre dash and radio brackets(most of mine are missing) Some spare fuses.

Sorry for the late reply guys, many thanks for solving the puzzle for me lol.I have got zed withdrawl....two weeks before we reunite lol.

Looking for all the rear plastics if possible including the bulkhead. Alezan gear knob and handbrake, heated seat switch passenger side, footwell fuses various.possibly more to be added.

Hi all, this has been bugging me since I got my new windscreen in at the new year and was wondering if anyone can shed some light on it. On the windscreen top middle there is a black device stuck to the windscreen with a wire coming out of it, does anyone know what this is/does.

Hi mate there is a post somewhere that explains all this. If you got a facia and headunit this would be all you would need if you were not wanting/have steering wheel controls. Basically all you would need to do is connect the wiring loom from the headunit to the pac (wire colour codes supplied) and all should work perfectly mate. I hope this is of help to you mate.

Bought this in error from a member on here.It will work on a Bose system however I was after retaining the Steering controls and opted for the ICT leads.It will come with soldered ends and the diagram showing the wiring colours. Looking for £30 + p+p

Hi folks, Sorry there has been no reply on this but fixed it a couple of days ago. The clicking behind the dash gave the game away, so I took the dash panel off to reveal the Parrot bluetooth kit.I disconnected it and now all is well. I must admit that it was a bit confusing as there was loads of extra connectors when I took out the original Bose headunitt so I was convinced that this was for the Bose add-on.It was not until it started talking french that I discovered the extra 3 miles of cable and 40 connectors were for the Parrot lol.All is well now and just need to set the kenwood PS9527 up once I get the oppertunity. Many thank to all for there suggestions. Merci.

Lol you guys are cracking me up lol The good news is I got a recording, the bad news is I dont have a clue what it is saying so cant write it lol. As it is late I think it is best if I wait till the morning as it has thecurtains twitching when it kicks in and living in a flat that aint good lol.

It is definately something to do with the Bose.I can hear a relay clicking behind the passenger dash.it clicks then the message is transmitted so must be a problem.I will try and take a recording and try and type up if you could basically translate mate. Cheers Dave.

lol yeah this is a strange one. Nothing to do with the radio I am afraid voulez vouz. It turns the stereo to mute whilst it talks at max volume then once the broadcast has stopped then the radio or cd goes back on. I dont have a handsfree attached so cant think it would be that. This is strange and very frustrating as the system has now been returned to factory and it is still doing it.

lol It is nothing to do with the kenwood headhunit.It is something to do with the bose amp wiring. I have the bose plugged back in at the moment and it is exactly the same randomly telling me to do something in french.

I have just installed my Kenwood headunit with the ICT leads.All is working well apart from there are frequent Interuptions in FRENCH. I took the head unit out and plugged the BOSE back in and it is still spouting french.Has anyone came across this.PLEASE PLease help it is driving me mad.

Hi mate, It was myself that waved.I took the missus to aberdeen for Valentines, cant believe how common they are there.....we seen so many of them lol.Nice looking car by the way.

Can anyone confirm how good these are?I have been looking for one of these for a while as the car is kept outside unfortunatly, was wondering if it is better to get one at half the price.All comments greatly appreciated.

Hi all, I wonder if someone can help. I have a UK GT with Bose however the uk Bose was replaced with a JAP Bose before I got it which was doing my head in when cold. I had my Kenwood headunit still in the old car so decided to swap it over. I purchased the single din dash PAC NIS1 (I believe) says OEM 1 Kenwood lead from headunit to pac Firstly after taking out the Bose head unit I discovered that there is just endless adaptors for presumably the bose system.That end up in a box in below the passenger airbag. Well I soldered the new kenwood adaptor tails to the pac and once finished belled them out to check continuity all was well. There are cables not attached as follows: Kenwood lead: Power Antenna, Phone mute PAC: Power Antenna When I connect it all up there is no sound through the speakers.Having done a few basic installs in my previous car this points to the switch wire for the amp however this seems to be working. All the wiring seems to be fine so extremely confused. Any ideas welcome and will be much appreciated. Also reading one of the latest posts can someone confirm that the pac adaptor should work without the steering control. Also is it better to get the ICT leads and adaptor, and confirm it is just the two leads that are required and no PAC is required. Your help is greatly appreciated. Cheers Dave