scottsoulby

Hi, sorry to bump the thread, I’ve also got the nifty system in a 370 I just bought, it works fine if I’m stationary, but then come up with no display and just saying pay attention to the road once I start driving,  I’m assuming there is a wire I may need to earth to remove this? 
Also, my reverse camera comes up blank, I’ve powered it via the reverse bulb wiring and plugged it into the unit, however no joy, I’ve also tried a new camera but that’s the same, it’s got the lines but no actual picture 

Hi

im having an issue where my hazards, heated seats, airbag module etc underneath the centre console don’t work, they don’t seem to be getting power, everything else does, indicators. Radio etc etc all work just no power to the centre middle console

ive had the dash out to check earths, no obvious splits etc, even tried another bcm, ipdm and fuse module but still nothing, so I can’t understand the issue, car has uprev so still starts

anything else I should be checking that you might know of, any help is much appreciated 

history of the car is a 2003 import model

thanks 

Hi

im having an issue where my hazards, heated seats, airbag module etc underneath the centre console don’t work, they don’t seem to be getting power, everything else does, indicators. Radio etc etc all work just no power to the centre middle console

ive had the dash out to check earths, no obvious splits etc, even tried another bcm, ipdm and fuse module but still nothing, so I can’t understand the issue, car has uprev so still starts

anything else I should be checking that you might know of, any help is much appreciated 

history of the car is a 2003 import model

thanks 

1 minute ago, JAllen28 said:

Is it this one? https://www.z1motorsports.com/exhaust/hks/hks-350z-hi-power-exhaust-system-p-2302.html 

 

How much you looking for?

It’s this one, I’ve been told by a couple of people as it’s rare that it should be around £750-£850 area

5 minutes ago, JAllen28 said:

Does the HKS fit a HR?

All the same catback I believe 

Hi, sorry if this is In the wrong section, the exhausts are for sale but once I figure out a price I’ll relist in the trading section

I’ve got a nismo Weldina exhaust and a HKS fully dual exhaust 

could anyone help me to price them please?

thanks

Just posted a weldina nismo exhaust for sale 

But it is a bit of a pain in the ass to fit. Especially to seal. Can't say about this one as I've not actually seen it, but with a bit of time and patience mine worked alright. Suppose the only issue is it was my car I tested it on, if it broke it was my engine knackered and no one elses

This is something I had made a few years ago but moved abroad, I sold my moulds and left any few bits I had behind, they must of made one after I'd gone. it's not the only one in the world, well it could be now I suppose. I had a working one of these on my car which ov53 now owns, could still be on. It does fit, the only issue is the sealent of it, you need a good thickish sealant tape to fit it. Mine didn't leak air. Many older members saw it when we had the 370z open day at Howden Nissan. The underside was designed to be rough as it was meant to help the air bounce around more. The company who made this make bmw m3 race parts so I assumed they knew what they were doing.

**SOLD to cesc**

hi guys, just received some LED rear lights that i sold to nik, they were slightly damaged in the post so after a claim i received them back, the damage is only small but, its still damage hence the low price. the only damage i can see is a little bit of the bottom drivers side corner is snapped off, which is shown in the picture

im asking £120 + delivery ono

Pic of the lights and damage,

**SOLD**

ive got a very low priced nismo for sale, but it doesnt meet so many of your requirements im afraid, but it is a bargain, and potentially you could do the upgrades with the money you save

its on here just waiting to be authorised, or ebay : 200531150895

now on ebay starting at £7000, grab yourself a bargain!!!!!!!!!!!!!!!!!

item number:

200531150895

With the money you save buying mine for maybe 7600 you could get the leather, I couldn't do anything about the mileage, although it is Nissan full serviced so the engine has been looked after

Mine is available

For the right offer there's a bargain to be had

viewtopic.php?f=56&t=41588

SOLD to bhavin85

Any enquires about parts now should be made through him, i believe he is already a trader

ah ok mate, the only mods ive done is the exhaust, springs and alloys, which i can swap for the orginal rays, i wouldnt swap the exhaust back though as this exhaust sounds amazing, the kit is all factory fitted, and a possible bargain for anyone who makes an offer

Im moving to egypt for a while with the misses and doing my padi scuba courses, then im not sure where ill be, im not really a planning type of person

have you considered this one, im open to offers

viewtopic.php?f=56&t=41588

still open to offer worst i can say is no or do a deal

looks good enough mate

how about this one viewtopic.php?f=56&t=41588

Hi guys,

Just a thread to see if anyone is interested i carrying on the carbon fibre business i started as im moving abroad end of the month, the moulds are at a company called gg steel in kirton in lindsey, north lincolnshire, they will carry on making the parts for you, all you need to do is ring them and ask for what you need, and pay for the products that you have orders for, then sell them on, I have the following moulds:

Engine Cover

Plenum + Spacer

Battery/Brake Surrounds

Battery/Brake Covers

B pillar covers

Also i have a celica 190 full engine bay mould which is being sold seperatly but can do a deal for both if you want to sell these as well

JDMPerformance are interested in buying parts and producing more products so there is a chance to expand your product range, i have the emails from jdmperformace that i would forward on and also let them know to contact you from now on,

These moulds have cost me a fortune to develop (approx £1500 in total) but they need to go so feel free to make an offer either the 350z moulds or both the 350z and Celica 190 together

Martinmac and various other members have bought from me, to see pics of the products please follow the link in my signature

Any questions please ask

Thanks

Scott

no worries mate

but it is a nissan nismo kit, so factory fitted, apart from the wheels, just selling cheap as im moving abroad soon

Good luck with the search

I have an Azure nismo for sale here for 8k

viewtopic.php?f=56&t=41588

ABS, traction etc now fixed and working properly, still needs a hub though as there is a slight groan from the bearing