-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Arrow
-
-
Ive had the clutch, pressure plate & bearing replaced but still have judder when
Pulling away at low revs, have been told that when this happens you should replace the flywheel at the same time
I have been looking around at various makes and it seems that aftermarket clutch kits include a flywheel at £1000 +
Is there any benefit fitting aftermarket?
-
Need to replace the dual mass flywheel is it worth getting aftermarket or should i just replace it with OEM
some advice needed
-
Invidia supply two baffles with the zorst, that fit into the two rear silencer boxes just in case you find it a little loud
-
Bought mine from an ex forum member who never fitted it i think he imported
from the US so carriage, tax, vat would be added to this
-
£500 quid or there abouts
-
Thinking of buying an invidia N1
there is an issue with the baffles decided to try them in for 1st time this week, slightly tight fit, but very effective the issue starts here try removing them after you have run the car, Once zorst has cooled down they wont come out had or resort to a dent puller to remove them they tighten on the inner seem of the rear silencer box
There are three options to resolve this (1) don’t fit baffles, (2) lap down inner seem as I did or (3) don’t fit exhaust
Option 3 is not an option as this is the best sounding zorst ive heard for the Z
-
Is the diagnostic socket on the Z ( OBDII / CAN-BUS ) or something else
for the nissan consult
-
Must say have not had any problems with insurance on my JDM car, Currently insured with Aquote £350 with wife included , Double uk price ( NO WAY )
-
Thanks for all the help useful stuff, much appreciated. Anyone dealt with Bonsai cars?
They have been around for sometime, all i hear is they can move the price after the deal and during shipping, but that was from other dealers.
You can bank on that
-
I drive my jdm like it should be driven this suspension issue i am sure most drivers
That don’t do track days could not tell the difference
-
Steve it’s not my experience that JDM insurance is higher then uk if you look in the right places
I know a few UK car owners that are paying well above the price I paid
The only problem I had was the limited number of company’s doing imports
Dual Mass Flywheel
in 350Z General
Posted
What sort of money are we talking about & were from