350dannyp

Had another look today and opened up the secondary fuse box and put testers on all the fuses and found that the ign & eccs cont fuse had blown so put another fuse in and it started straight away I didn't let it run for long as the other belt was squealing and badly frayed 

I manage to get under the car and have a look today and it doesn't look like it damage anything else any other suggestions on what it could be?

My ac belt snapped today and the engine cut out it ripped out one of the cables that go into the green plug above the top pulley tried putting it back in now car will turn over but not start I've got all the lights lit up on dash and fan is constantly on and have no temperature gauge am I right in thinking the car should start without  the small belt

Hi Just changed my clutch and flywheel to tarmacsportz rts clutch and lightend flywheel New slave cylinder. Clutch pedal feels a lot lighter now and biting point is low.

When you try and put it in 1st and reverse gear with engine on it's hard but when engine off it's easy to put into 1st and reverse. Would the slave possibly need bleeding again?

Hi guys 

My clutch has started slipping what do you lot reccomend as a replacement as an Improvement over stock?

Would I benefit from lightend flywheel?

350z 06 DE 

Hi looking to get new pads which pads are better ferodo ds2500 or hawk hps?

Or any reccomendations for other pads?

mostly being used for fast road with maybe occasional track day. 

I'll look in to getting tyres soon then don't want snap oversteer. with the 30mm drop will the car scrape loads on bumps?

Do you need adjustable camber arms with 30mm drop? 

Tyres are jus budgets that were on the wheels already 255/35/18 all round 

But not giving out any traction control problems so jus gonna leave them on for a while and then buy staggered tyres 

Hi I've jus put on a set of rota d2ex wheels on the z and the arch gap is massive on the rear currently on standard suspension tyres have a 35 profile. 

Looking at getting some springs what would be best?