bexxxhill

I have NISMO suspension on my 350GT, and a top ball joint needs replacing.  Are the suspension arms cross fitting between 350Z and the GT?  And if so does anyone know where I can source NISMO replacement parts?

My 350GT recently went in for some work, and came back with the pedal loose.  I cannot find the clip that holds it onto the bar - anyone have one for sale or know a supplier for just the clip (don't really want to buy a whole assembly or even the pedal).  Note: I believe the Z will fit the 350GT.

All help much appreciated, Nick

On 03/11/2017 at 14:12, ZMANALEX said:

Plenty genuine Nissan top hoses and clips in stock.

Just drop me a PM if I can help further.

You have PM....

Oops forgot the image to go with it

I have a leak from the top rad hose on my 350GT - can't see if it is the hose itself or the clip getting loose.  I am led to believe it is the same part used on the Z as my GT.  Anyone recommend a supplier?  Don't want cheap Chinese parts though.

cheers, Nick

anyone?

I think I have sourced actuators now, but still looking for lock/mechanism/key, if anyone knows a 350GT with one available

Drawing a blank with finding a 350GT being scrapped so it looks like a call to Nissan for OEM parts - bank balance isn't going to like this

Still looking for a lock mechanism/barrel and key for my 350GT...anyone?

Thank you - I have actually watched that one - it's a good informative 'how-to'. I shall commit to memory

... rather than a DIY fix - (I have seen the videos on the generic aftermarket replacements)...

 

Mate, I still don't know what you mean by 'rather than a DIY fix'...the DIYs I'm talking about are video tutorials how to change the door mechanism using genuine replacement nissan parts, nothing to do with universal parts or some cheap half-the-job fix... The proper job, with the proper parts, just so there's no confusion... I'll link them if you like, cos I have the distinct impression that you think I mean something else, or you're looking at something else

 

P.S. If you change the lock barrel, Aren't you going to need both sides and ignition barrel too? What;s wrong with your lock barrel? I doubt you'll need to change that or that it cannot be somehow transplanted in the new door lock mech, but that's an assumption, I haven't tried.

If you could link the videos that would be great, thanks.

I do need the door lock barrel, as when I put the key in it, it just turns without locking/unlocking the door; i think, the internals are no good now. I can change the lock and leave the ignition, surely? Just means two different keys

I also believe they are the same. If you look on youtube for 350Z or G35 door actuator DIYs, you'll find at least two that I can think of. I saw them recently cos I also have a broken actuator on my driver's door. Both DIYs that I've seen were performed on a G35 and advertised as being valid also for the 350z.

 

If I were you I would use the site everythingnissan.com to confirm that the part numbers are the same on original equipment, then when you've confirmed that, drop Jon@Emporer or ZMANALEX a PM with what you need, they will have it in stock. I have a door actuator from Jon sitting in my boot, waiting for me to go get my diff fitted and this done at the same time.

 

Excellent, thanks for this.

I know there is a DIY replacement that involves using a generic actuator but if I can replace the genuine part with OEM I would rather do that, and if a Z one will fit the GT then that is easily sorted

 

Now to find a door lock and I will be even happier

 

Nick, I forgot about the aftermarket door actuator for the G35 and the kits are cheap as chips from USA @ about $10

 

There are plenty videos for this on youtube and looks very straight forward and only requires the door card removed and a few extra holes drilled and a couple of wires snipped, extended and re-routed.

 

However you will still require the lock and barrel in your instance.

As I am taking the door apart anyway, to sort the lock, I may as well replace the actuators rather than a DIY fix - (I have seen the videos on the generic aftermarket replacements). I mat replace the window motor too as I know they are a weak spot.

I think it is going to be finding a lock/key that will be the hard part.

Nick,

 

All parts are in stock for a 350.

 

PM received and replied to.

 

Alex.

Thanks Alex - replied

I also believe they are the same. If you look on youtube for 350Z or G35 door actuator DIYs, you'll find at least two that I can think of. I saw them recently cos I also have a broken actuator on my driver's door. Both DIYs that I've seen were performed on a G35 and advertised as being valid also for the 350z.

 

If I were you I would use the site everythingnissan.com to confirm that the part numbers are the same on original equipment, then when you've confirmed that, drop Jon@Emporer or ZMANALEX a PM with what you need, they will have it in stock. I have a door actuator from Jon sitting in my boot, waiting for me to go get my diff fitted and this done at the same time.

Excellent, thanks for this.

I know there is a DIY replacement that involves using a generic actuator but if I can replace the genuine part with OEM I would rather do that, and if a Z one will fit the GT then that is easily sorted

Now to find a door lock and I will be even happier

My 350GT has decided that its door lock doesn't want to function anymore - key turns but doesn't do anything. I have been using the key for last few months as the ever dependable actuators stopped too.

So does anyone have a GT they are breaking, with the lock, and actuators for sale? (Obv the actuators need to work lol)

I know these cars a somewhat rarer in the UK but someone must know of one being broken? I've tried over on the SOF but no joy there as yet.

All help appreciated, Nick

@Aashenfox - it looks like this might be the lock barrel itself rather than the actuator (even though I will probably need to replace that too). Just need to source one!

Tricky - yes I am thinking it is most likely the lock itself - barrel assembly possibly, rather than the actuator. I will have a look around at a replacement and key.

Hi all, hoping someone can help wit m 350GT problem.

Last year the remote central locking failed which appears to be a common fault on the GT. I did not feel capable of changing it myself and as I could still use the key it didn't really bother me.

Well, today I went to lock the car with the key and nothing.....it turns fine but there is only a slight movement in the interior lever to show anything at all. Also, when the key turns it feels different, like something has come loose or is rubbing.

Question is, do I need to strip the whole door to see what the problem is? Remove window etc? Anyone had any experience of fixing this fault?

( I have posted this on the Skyline/350GT forum too)

All the best, Nick

Thanks for the info mate - as I said I was just curious Good luck with the project, I shall be keeping an eye on it

Thanks for replying Wasso - not actually looking at doing so, just wondered what is possible. I have a 350GT at the moment which is above average mileage, and IF it ever needed a new engine I was pondering what would be the merits etc of transplanting a V8 over getting a rebuilt etc VQ Cost wise I would imagine getting a rebuilt and then tuned VQ would be infinitely easier/cheaper lol

Not that I am looking to do so, but has anyone swapped out their Z engine for a V8 at all? I have seen a couple in the US with LS engines, but what about over here? What would it take?