rasco

18" Rays from my 350z. In shadow chrome, all are kerbed, one is bubbling, but all straight and true. They still look good on the car (I've had them on my car in this condition for 18 months, only changed as decided to go 19") This is how they look on the car (car not included!): These all have MPSS tyres on, fronts have 4-5mm tread. Rears have 3-4mm tread, one has had a puncture repair. It also looks like (though they both have the usual embedded stones) one has a nail in, but they're both holding air at the moment (I didn't notice any pressure loss while they are on the car). But I'm also selling these wheels with Pirelli P-Zeros (for the rear) with 6-7mm tread on (that were on these wheels, from new, for a little while before they were changed for MPSSs) Fronts: Front 1: Front 2: Rear 1: nail: puncture repair: Rear 2: P-Zero 1: P-Zero 2: Collection only from Basingstoke, £400 for the lot.

Oh man. So. Much. Want. Will pm you

OK fella cheers

I'm still tempted. If I can sell my seats, I'll be all over this!

ooooh tempting!

clearout of some of the parts off of my Z. Located in Basingstoke Black leather heated seats, all heaters/motors etc working perfectly, only selling as I wanted to sit lower. These need a re-dye but have no rips/tears. All the black seats I see for sale now are either worn like this or re-dyed already (tell tale black stitching). I've taken the seatbelt bits for my new seats. Also the driver's side airbag wire has had some wires soldered on, these were soldered directly to the airbag wires on the other side of the clip. I can only imagine this was done because the clip connection may have been intermittent....maybe. £120 collection only. new (never fitted) sideskirts, in Azure blue. Was planning to fit but really I'd need to fit a front lip at the same time. Was keeping them for when the time comes but could do with the cash tbh. Collection only as I'd want the buyer to check against their car as these were painted (professionally) when I had my car painted, so are a perfect match for mine but I can't guarantee an exact match to yours! £200. If these don't sell I'll keep them and fit them one day steering wheel - £50 delivered

Hah! Oi Loving the Z fella - it really is my dream car. I will keep it for as long as I'm able to run it. So yes, I'd love that key!! You're welcome round any time fella. Would love to see the MR2 too. It turned out it wasn't the manifold that was the problem, it was the exhaust link pipe. I've had some issues with it (it has been off the car twice now, once a year!) but now is spot on. I still get compliments for how it sounds. I go through cycles of wanting it louder then wanting it how it is. Will leave it for now. Will have to post up some interior pics soon, with the new seats, though you can always come round and try them for yourself And of course, you need no permission from me to create a build thread - in fact, I'd be first in line to read it.

Hey Ekona ah he went MR2, nice! I know he was considering boxsters at the time. Glad to hear he's doing good - really nice guy.

and apart from some new B-pillar trims, I'm back on the interior of the car. Always felt the stock seats were a bit high. Finally settled on Corbeau Boss Evo seats with OMP brackets......updates to follow in the near future, cheers for reading

Last bit before paint was a strosek style rear spoiler. No pre-fitting photos of this, sorry! Front and rear badges changed, door handles painted black, and this is how my car looks now: spoiler looks a bit naff in the photos but in person it is perfect - now I wouldn't have anything else.

I also really don't like the UK number plate on the rear of the Z. Spent ages quizzing Payco about a chargespeed rear (love his car BTW - exactly to my taste ) but to get it done right would have cost a fortune. So picked up an import bumper with a fibreglass lip instead:

Cheers fella yours twin or single? more recently, been working on the exterior a bit. Collecting parts before booking in for fresh paint. Met CrustyCrab to buy some G35 19" Rays. Another nice Z owner. Great to start meeting people. These were in need of a refurb and a new set of tyres. I ended up going MPSS (which were also on my 18s) and the weight saving compared to the budget Accelera was surprising. I fitted the wheels with the old tyres on and was initially a bit disappointed with the extra unsprung weight, but since the refurb and MPSSs, I doubt I could tell the difference above 10mph.....

ok so with the car mechanically sorted, most of my mods have been cosmetic. To start with, I added oil temp and boost gauges in an A-pillar pod, and fitted a Pioneer head unit, Blox gear knob, gear boot, handbrake cover and arm rest....this is how it ended up looking:

Cheers fella but it's been all good for a couple of years now. Got oil temp gauge now as well which I always keep a close eye on!

welcome!

just one photo for now, will sort the more recent ones tomorrow. Here's how it looked when I bought it : basically a fairly standard Z.... could've pulled a stock photo TBH.....lol. Here's my previous car anyways, my Leon Cupra R. loved it: and the car that got me in to modding: not that you really wanted to see that - but I can't do any other photos till tomorrow....

owned my Z for 18 months or so, but not got round to starting a build thread.....better late than never bought my car from WaltzInBlack, a forum member. Top guy, wonder how he's doing these days. No photos as yet (I'll sort those later) but here's the spec when I bought it. Photos and my additions to follow! Engine/fuelling: 1) HKS single turbo kit which includes front mounted intercooler and induction kit/filter. Manual boost control valve fitted by Horsham 2) Upgraded injectors 3) Fuel return system/upgraded fuel rails 4) Upgraded Walbro fuel pump 5) Uprated MAF sensor 6) Plenum spacer 7) new fuel tank senders Cooling: 1) HKS FMIC as above. 2) Mocal oil cooler kit. 3) Mishimoto 350z alu radiator and fan kit 4) Cosworth 1.3 bar high pressure rad cap Suspension: 1) BC BR series racing coilovers for 350z. 2) Eibach upgraded ARBs front and rear 3) ALL relevant suspension/subframe links fitted with superpro Poly bushes 4) Whiteline poly diff mounts 5) Uprated drop links Braking: 1) Steel braided hoses front and rear 2) Uprated Ferodo DS2500 pads all round 3) Uprated DBA 4000 series disks all round Transmission: 1) Braided clutch lines 2) Quaife ATB limited slip differential Exhaust: 1) Longlife stainless steel exhaust (from turbo back) Mapping: 1) Uprev standard ECU by Horsham - 370-80bhp/360/70lbft 0.5 bar Cosmetic/other: 1) RSW real carbon interior kit 2) Uprated (facelift) bi-xenon headlights and LED tail/brake lights 3) Wheel spacers 25mm rear / 20mm front 4) Honda S2000 stubby aerial

OK am I just being thick? Ive bought some corbeau boss evo (bottom mount) seats, and have bought OMP frames, as they're a combination suggested by an online retailer. But the bolt pattern is way off. OMP is 270x345 but the seats are roughly 290x330. I'm about to go and drill new holes in the frames, but surely there is a better way? I know sliders normally go between but height is an issue and I can reach the pedals with the stock seat all the way back so figured I'd have a go without sliders - though even having sliders won't accommodate these two different bolt patterns. Am I missing something?

I would imagine the reclining seats would sit higher. Only mine are side mounted while the reclining seats are normally bottom mounted Yep this is what I'm finding. A side mounted bucket seat, in size fatty (XL) I'm told will not fit in the Z due to the shoulders. Worried that bottom mount recliner will be too tall. Maybe it would be OK if I don't bother with sliders?

Rich, at the right price I could be interested. Am looking for an option that will sit a little lower than electrics. Are these basically the same as the cloth version?

How much collected? I'm in Basingstoke myself.currently £179 online as it's on sale, I'd be interested in a bargain ta!

Sorry guys I'm definitely taking it. Hooch I've pmd you

I'll take the steering wheel

need to find someone near Basingstoke with cloth (non-electric) seats so I can try them out.......

good to know, thanks fella. Does it have to be the JDM version? Or UK cloth seats OK?