Jump to content

robertsjames

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by robertsjames

  1. Hi Guys.

     

    Some of you may have seen on the wanted section that I was after a 350z and I finally took the plunge on a lovely Azure blue example with only 30,000 miles. The modding started straight away and I have already had an Invidia Gemini exhaust with decats fitted along with the interior bulb changes. I wanted something more from the ICE so I decided to follow some of the guides on here (this forum is great) and fitted a Sony XAV601BT.

     

    Whilst I was doing this I thought I could do something a little different. I wanted a solution to charging my phone in the Cubby hole so I could use the Sat Nav and music functions but did not want to make holes in anything or have cables flying around inside of their. I have an LG G3 (great phone) which as standard comes with wireless charging, it also fits perfectly into the Cubby hole like it was made specifically for it.

     

    IMG_4223.jpg

     

    I bought a Choetech wireless charger off eBay and ripped it apart to unveil the insides:

     

    IMG_4225.jpg

     

    I had already taken apart the dash at this point to attach the Sony head unit so tested it on the back of the Cubby hole. I positioned the charger in the correct place and to my delight I found that my phone was charging.

     

    Positioning charger:

    IMG_4226.jpg

     

    Phone charging (see small red charging LED):

    IMG_4230.jpg

     

    I attached the wireless charger to the back of the Cubby hole using double sided foam tape and it was secured in place:

    IMG_4228.jpg

     

    I wanted a very seamless install so I spliced into the original front cigarette lighter and attached another one from Maplins which was surprisingly easy to do

     

    IMG_4231.jpg

     

    From this I attached a Samsung in car charger and simply taped it up so it would not come detached. I then fitted the USB cable into the car charger and the wireless charger.

     

    Samsung charger:

    IMG_4232.jpg

     

    USB into wireless charger:

    IMG_4233.jpg

     

    With all this done I simply refitted everything along with my new headunit and fired everything up.

     

    IMG_4235.jpg

     

    Everything works great and I now have a Bluetooth music player along with a free Sat Nav screen, as you can easily see the phone from the drivers seat. It looks pretty good and seamless I think, especially with no wires to see at all.

     

    Without phone:

    IMG_4238.jpg

     

     

    If you want to do this yourself some new phones come with wireless charging inbuilt but you can also buy cases that do the same thing that quite a few iPhone users have. Also make sure to buy a 2amp in car USB charger, anything lower will not give you a strong enough wireless charging signal to pass through the Cubby hole plastic.

     

    I thought this might be a bit interesting for some of you on here as it is something a little different. Thanks to all the people who have done guides on here previously as well, without them I would have not known where to start with my head unit fitting (busters Mod is great!)

    • Like 4
  2. Thanks for all the advice guys.. This is a great forum! Hopefully I will get to know it a bit better when I finally get a zed.

     

    I have decided against going to have a look at it. It is probably a little out of my price range if i'm honest and I don't want to waste both mine and the sellers time.

     

    A couple of well priced ones have come up recently so I will try and have a look at them.

     

    The search continues!

  3. Hey guys.

     

    I have been trawling through the forum recently making sure I know as much about owning a Zed as I can. I was just wondering if any of you know this car:

     

    http://www.autotrader.co.uk/classified/advert/201412019373853/sort/default/quicksearch/true/page/4/onesearchad/used%2Cnearlynew%2Cnew/make/nissan/model/350_z/postcode/kt229dp/usedcars/radius/1500?logcode=p

     

    I am thinking about going to have a look to see what its like. A few things put me off though, such as not one picture showing the car dry!

     

    Let me know what you guys think!

×
×
  • Create New...