mctb

Just rebuilding my 350z after a front end smash, I've now come to retire the drivers hid headlight plug as mine got pull off, 8 pin but I'm unsure what wire goes were below I've listed the passenger side combination plus numbering top left to right

Ns

1. Green red

2. Green white

3. Red yellow

4. Black

5. Blue yellow

6. Red blue

7. Red white

8. Black white

Wiring on side I have a choice of brown, white purple, red purple, blue yellow, green red, black white, red, black

Anyone out there can help

Just got full bodykit and wings for my 2007 350 now looking for a new bonnet with some styling anything considered

Im just got hold of the washer bottle and pump and are looking to put jets onto the bumper loads of after market ones saves on the cost of the popups

Looking for a pair of after market wings/fenders also need a black bonnet either original or after market

Face lift headlights are very hard to get hold of at a fair price i need a drivers side one and cost me £375 second hand as none around, i would say if you don't need self levelling ie 2006 dual xenons look to after market ones

Im looking to install a body kit on my 2007 zed, and are looking at the options for the headlight washers as they are now a MOT requirement, the popup ones are all very fine but with most kits need a lot of alteration to fit, so im wondering if anyone has had experience in installing fixed jets a bit like the one on the bonnet, looking at the washer system should be a very easy install.

I have a similar problems as putting a 350Z back on road after crash in theory any pressure washer system should work, might need a trip to a Jap breakers and see what is available.

Current im using Dephi with a laptop but im looking to move onto a handheld devise plus have a 2007 350z delphi doesn't seem to support it that well, don't want to go over board on cost and have been looking at the Autel 802 as this does Airbags and ABS any thoughts. or can anyone else recommend a decent scanner.

I'm currently confused I'm replacing the ns roof airbag and ns passenger seat just sending module off to get crash data removed, but when I look at the manual it's saying I should replace the crash sensors but as I haven't come across any or seen any for sale on ebay are they on a 2007 350z also is there only one module that cover the whole of the airbag system. For reference the car was hit ns right at the front No other bags deployed.

Found it and removed cheers, I'm currently confused I'm replacing the ns roof airbag and passenger seat just sending module off to get crash data removed, but when I look at the manual it's saying I should replace the crash sensors but as I haven't come across any or seen any for sale on ebay are they on a 2007 350z also is there only one module that cover the whole of the airbag system

Does anyone know if you can lift the rear of the centre consol to get to the airbag module or is it a full strip down

Just about to replace my passenger seat and roof airbags after crash does anyone know were the module is for these so i can get them reset.

It really surprises me 350Z a Japanese car, the Japs are RHD and heavily into modifying there cars but here in the UK we seems to be lacking decent OEM headlights modified or not, i have a 2007 model so have to deal with the extra issues levelling and washers. Someone out there must have a contact for one of the Japanese custom shops.

Im just rebuilding a 2007 350 after a crash, front end mainly plastics etc, when i got the car the front bumper had been removed and washer bottles missing, so at the moment im trying to piece it all back together. I know the car had headlight washers as the switch is inside the car, no problems with the OS washer bottle 2 pumps its the NS bottle im confused about as all the pictures on Google showing the layout show a 3rd pump which must work the headlight washers but on that side there is no wiring for a pump did they change the design on later models or an i missing something here. I do have a manual but i cant find a diagram on the washer setup.

Look on Ebay for the Taiwan seller selling the headlights he can get RHD but they cost £35 more and take about 2 weeks believe they are the ones name for the Japanese and Australian market

looking for NS and OS washer bottles plus the headlamp washers plus does anyone have the layout of the system for a 2007 350 GT, front end smash mine are missing as brought car damaged

Just got my first 350z, 2007 and just about to start repair to put back on road Cat C, no structure damage mainly plastics and some dents, so as i currently have no wings, bonnet or bumper im looking at a body kit but which way to go?