spike4real

Hi all,

I'm after some reasonably priced coilovers for my 2007 roadster.  I'm trying to avoid the low end un-servicable sets you can pickup these days but may end up doing so.

Thanks

Also interested...still for sale?

Thanks Adrian.  I'll give you a shout if I decide to go for a new one.  Cheers!

Hi all,

I'm looking for a Kinetix Velocity intake manifold if anyone is selling one?  My engine bay is looking abit dull and was considering getting a few things polished but like the idea of the Kinetix. 

Cheers

Dan

Looks ideal!  PM sent.

Hi Paul, has it already sold?  Can't access the listing at the moment.

Hi all,

Had an issue yesterday where my passenger window decided it didn't want to go back up.  It made the clicking noise as normal but no motor movement at all.  I searched the forum and found the handy trick of pressing the window up button while hitting below the window controls.  Very handy!  So for now the window is back up but don't really want to touch it while the weather is being typically british.  Am I right in thinking it sounds like a window motor issue?  If so can anyone recommend a supplier in the Midlands that I could collect from?

Cheers

Dan

I tested the steering controls earlier...volume up and down works fine but only one of the next\prev track buttons work, can't remember which one.

Update - previous track button works, next track button doesn't.

Absolutely loving it! Good luck with your install. Screw the stock mounting brackets on the side of the headunit, don't waste time looking at the plastic parts that come with the kit, they are not needed. Attach the kits front fascia onto the headunit before putting the centre console back together, the gear surround will push it all together at the end.

Oh and i used this kit on my facelift model with bose. It comes with extra stuff in case you want to install a single din unit.

http://www.ebay.co.uk/itm/370764695997?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Hi guys, here is a quick photo of the finished install. Excuse the messy car

Yeah I see what you mean about the data usage. I'll have to use the work phone hehe

Fitted!! Looks ace, will post photos during the bank holiday.

1.) Kayjay0_7 - Deposit paid

2.) Olly350z - Deposit paid

3.) Spike4real - Deposit paid

Thanks for the update guys.

ZedAndy - What features are included in the Kenwood you went for? I noticed DAB, that would have been pretty cool.

argh couldn't wait any longer, ordered mine and will find out the hard way

How did your fitting go?

ive been looking at that one too, please update us with how you get on!

1. MikeyM

2. Olly350z

3. Erni902

4. kayjay0_7

5. Taybo

6. Riichard

7. Doom!

8. Munton87

9. Spike4real

Just wanted to say a big thanks to Mitz at Cougar Store for supplying and fitting the SuperPro bushes along with the MOT this week. Very happy!

The reset procedure i followed was...

- Remove door card

- Close the window fully (not using auto-close)

- Close the door (or keep door sensor pressed)

- Press & hold the motor reset button

- Open the window fully (not using auto-open)

- Release motor reset button

- Open the door (or let go of door sensor)

- Reinstall door card.

Hi all,

I've noticed my passenger window is not dropping very much (maybe 2mm at most?) when opening the door. This causes the glass to catch and fold in the rubber seal which leads to a small leak when it rains. I've just ran through the reset procedure but it didn't make any difference. One thing I read after trying the reset is that the battery needs to be disconnected for 1-2mins before you do it - is this necessary? If so i might try it again while its dry. Failing that does it sound like a window motor issue?

Thanks

Dan

Mine died this year too at 10 years old, not bad going really!

Its an 07 RevUp with 39k. I'm probably going to go with the SuperPro poly bushes

Cheers guys i've sent Mitz a message.