-
Posts
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by adab
-
-
No, have not checked them out. GT Spec are really good, shame I can't get it to match.
Sent from my HTC One M9 using Tapatalk
-
Known commonly as the "W brace" for obvious reasons, haven't yet seen a standard one without rust!
Mines on its way out as well and was also looking to swap for the after market Ultra Racing above.
I put "GT Spec" braces on the underside of mine in other places but they don't seem to do this one!
- 1
-
Your a star Adrian..... :thumbs:
Many thanks for your help its much appreciated.
back home with no dramas all seems fine now!
- 1
-
Sent you a PM
-
Thanks Adrian, sounds good to me.
What's the best way to contact you to arrange a time?
-
Thanks Kyle will give them a call.
-
Hi guys,
Think I may have a steering angle sensor issue after retro fitting steering wheel.
Need a 350z local specialist with consult for checking and I am basically Cambridge!
Anyone out there that can help or point me in the right direction?
-
Sorry cov350z didn't read that properly.... Thanks for the tip, unfortunately i do need the sensor but will hopefully pass on the dealer charge of £80 and do the wheel shuffle to set.
Airbag light always on as I have removed the front seat and fitted buckets for the track.does your air bag light work still? vie goes off guess u have a resistor in it ? if so then the spiral cable all good its just needs a reset at a nissan main dealer im in the same position have heard its a 5 min job but nissan charges about £80
I think there is a thread on here about setting the steering sensor manually lock to lock, you may want to search, it may save you a few quid.
Mine is definitely knackered and need to replace.
-
Airbag light always on as I have removed the front seat and fitted buckets for the track.does your air bag light work still? vie goes off guess u have a resistor in it ? if so then the spiral cable all good its just needs a reset at a nissan main dealer im in the same position have heard its a 5 min job but nissan charges about £80
I think there is a thread on here about setting the steering sensor manually lock to lock, you may want to search, it may save you a few quid.
Mine is definitely knackered and need to replace.
-
Sorry, I'm not sure, there are definitely guys on the forum that will be able to help. Post your question and they will answer!
Sent from my HTC One M9 using Tapatalk
-
Hi guys,
Managed to damage the steering angle sensor when changing the steering wheel for my track car.
Now traction control and abs goes nuts over 15mph then goes off, not a problem for track but want to sort out.
Anyone out there got one gathering dust on the shelf....
-
Hi Ian,
PM'd re this.
-
Ian, what's your best price for both bars delivered?
-
SO............... is it on the car????
-
#14..
Looking for a bias to track as its my toy not everyday car.
Set-up ? Pretty planted for the initial set-up but with decent turn in.
Looking for lap time to improve so not a drifty back end, want to get the traction down not just smoke the tyres.
Does that help?
-
We all like a spot on back end philw99
-
Don't know yet Ekona, they are being fitted tomorrow.
Thanks for the heads up on setting for road use will give it a try. Harder probably for the track however.
My mechanic sets up race cars so a few blasts down the bypass will probably result in a decent set for both. I will let you know what he comes up with.
Cheers
-
All opinions welcomed Bodyboarder81..........
Thanks for the input, will be conveyed.
-
Will try, thanks RobPhoboS
-
Your a star..........
Will pass on.
Many thanks will let you know how we get on.
-
Couldn't resist
-
:blush: :blush: :blush: :blush:
-
Hi guys,
Hopefully one or more of you may be able to assist!
Cars in the garage having BC coilovers fitted with host of other bits and will then have a full geo setup.
Mechanic sets up mx5 race cars and has a Hunter 4 wheel alignment system.
He's just asked me to ask you............ as many will have been through the process.
Car to be set up for trackday use,
Whats the best set-up to try for camber and toe in front and rear?
She is sitting on 19" rota grids.
Probably many different answers but any help from the tried and tested would be appreciated and forwarded on.
Thanks in anticipation..
-
Bet its not often the missus gets her hands on the end of 15 inches!
GLWTS.
- 1
Nearside Bumper Headlight Washer Popup
in Wanted
Posted
Need the nearside front bumper headlight washer jet for my 04.
Preferebly in Gunmetal grey but will paint if required.
Anyone out there able to help?