Puptread

I used the comma semi synth 75-90 just to see if it made any difference , it did : ) and wasn't silly money.

As for filling/ draining , you wouldn't be able to reach the drain plug through the gear stick area and not sure about top ip plug

I used front ramps and 4ft of garden hose to fill mine up

Also warmed the oil up in the microwave so the oil in the bottle flowed easier

Ended up an easy job.

I didn't use the 2001g

I used the basic black stuff that comes in a squeeze tube

Just read about the latter , sounds good !

Hi all

Had shift problems especially in the morning when cold

Just to say I've stuck new comma 75-90 oil in and a tube of molyslip ,and this morning , no shift problem at all , and generally all round better gear change.

Hi guy's

My 350 has a really low clutch bite

It's about an inch or so off the floor !

Is there anyway of bringing the bite higher?

I've read about adjusting the rod for lowering the bite but can't find any complaints or info on raising it

I assume its just the opposite but nothing written up , so thought someone may know : o

Cheers

Cheers guy's

Think i will go for one of the above mentioned and maybe steer clear of a janspeed system.

Anyway could do with a better sound as the OE is so quiet !

Any issues with it being the fairlady model ? Or are the parts pretty much similar ?

Just bought my first 350z

It's in need of a back box and centre pipe

I've seen lots of after market systems but can't find any OE exhausts online

Anyone now where I can acquire OE and/or if the aftermarket stuff is any good ?