-
Posts
127 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by moratia
-
-
Heya,
I'm sure there used to be an area where you could get a price check for zed or parts but I can't seem to find it.
I'm looking for some opinions on how much my zed is worth with all its mods and also on a set of 18" Volk GT-AV's
Any help would be appreciated.
-
Something really strange happened last week, accelerated from the lights and my car lost power and wouldn't go over 2500rpm. Luckily I was close to work and parked up, now I was still I could rev like normal, no noises, smoke, smell, no engine light, nothing. I turned it off and on and she was fine.
This morning, same thing driving along and again no power.
I've got a vented bonnet so wondered if the intake cone had gotten a little wet but it seemed OK, certainly not soaked.
Just in case I thought I'd see if there were any codes (even though engine light was still not on) and there were two pending P1271 and P1281. I've looked them up and they are:
P1271 A/F SENSOR 1 (B1=Bank1) No activity
P1281 A/F SENSOR 1 (B2=Bank2)
Can someone tell me why these would come up and what I need to do.
-
-
-
The bonnet is real, seibon vs2
-
-
Thanks Adrian, I fitted the Nismo 380RS pedal today and it feels so much better!
- 1
-
-
I got my CS rear bumper from Amazon, awesome service and arrived before the ETA.
-
Sold please lock
-
Yep, they are still available
-
-
Price dropped to £550
-
Just the wheels
-
I'm not lowered in these pix, but my side skirts and rear hang a little lower than the standard ones
-
-
Carbon Pillar Covers are now sold to JC
-
18" Rota Grid Drift Set - £550 (collection from NP10 preferred or buyer arranges courier)
I bought them from RimStyle and they were on the car for around 2k miles, they've never been curbed and well looked after.
Sizes:
2 x 18" Rota Grid Drift (18 x 8.5", 5 x 114.3, ET30)
2 x 18" Rota Grid Drift (18 x 9.5", 5 x 114.3, ET30)
Fronts
Backs
There are some very light scratches here and there from storage, I've not tried to polish them out but I don't they would be that noticeable once they are on the car.
-
So I'm having a bit of a clearout to fund my exhaust
First up....
Set of Door Controls - SOLD
These are in pretty good condition, they've had carbon covers on so there is a little bit of 3m residue but all good
Wrapped Door Pull - £10 delivered
Its been wrapped, not really sure what's underneath so might have marks or something
Engine Torque Damper Kit - SOLD
I got this from the Group Buy but never got around to fitting it. The damper is red and comes with the fittings bags.
Lifted this from the group thread
- Helps improve the life of your engine mounts under hard driving
- Will improve smoother power to the wheel
- Reduces engine vibration and will increase horsepower to the flywheel
- Ideal for track and drift days
- Mounts to the suspension top mount and bolts to engine
Carbon Pillar Covers - SOLD
I got these as a gift but never fitted, they are the stick on type and my mate put the "nismo" letters on, these can be pealed off
- Helps improve the life of your engine mounts under hard driving
-
-
bump!
No one got one hanging around?
-
I'm looking for a centre console (DE), pref. with gauge pods, to buy or borrow while mine gets dipped.
-
Anyone have a Kinetix or a Cosworth plenum kicking about?
-
Volk Racing: 18" GT-AV Red & Graphite
in 350Z General
Posted
It looks like the time has come to part with the Zed and I'll be taking my wheels off, the thing is I have no idea what they are worth.
So as advised by GMballistic, here are some pix and info.
These had a full refurb by The Wheel Specialist in Cwmbran with all valves and some of the bolts replaced. Center caps were also modified as I thought the Volk Racing Time Attack Center Caps were a better match.
Offset wise, I am not sure, there were no markings but I think I am running 20/30 spacers which I can include, see pix further down to see how they sit in the arch.
Tyres are Nankang, done about 2000 miles and were all fitted at the same time:
There is no curbing or scratches, and look great.
So, what do you think a realistic price would be?